631179

Elna 344 Manual

72
Zoom out
Zoom in
Previous page
1/77
Next page
71
TROUBLESHOOTING
SKIPPING OR IRREGULAR STITCHES
BREAKING THREADS
FABRIC PUCKERS OR STRETCHES OUT
OF SHAPE
NEEDLE BREAKS
MACHINE JAMS
MACHINE RUNS SLOW OR NOT AT ALL
NOISY MACHINE
FABRIC IS NOT CUT
FABRIC NOT CUT CORRECTLY
STITCHES ARE NOT FORMED CORRECTLY
ALONG FABRIC EDGE
Incorrect threading..............................................
Incorrect thread tensions....................................
Needle problems-poor quality, bent or dull...............
Needles not inserted correctly..................................
Do not pull on fabric, guide it gently.........................
Needle plate or foot not attached correctly..............
Cutting width dial not set correctly............................
Antenna not extended/positioned correctly..............
Incorrect threading..............................................
Incorrect thread tensions.....................................
Thread tangled or knotted........................................
When re-threading lower looper, needle
eye must be unthreaded before
re-threading looper................................................
Needle plate or foot not attached correctly...............
Antenna not extended/positioned correctly...............
Needle tension(s) too high........................................
Stitch length not set correctly....................................
Thread too heavy......................................................
Needle plate or foot not attached correctly...............
Differential feed not set correctly for fabric...............
Needle strikes foot or needle plate while pulling
on fabric; do not pull fabric, gently guide it...........
Needle problems poor quality, bent or dull...............
Needle(s) not inserted correctly................................
Incorrect threading..........................................
Needle plate not attached correctly.......................
Stitch length too short...........................................
Incorrect thread tensions.................................
Thread tangled or knotted....................................
Upper cutting blade is disengaged and
fabric edge is too far to right; needles
can break............................................................
Check safety system............................................
Reconnect foot control..........................................
Clean and oil........................................................
Switch machine on................................................
Clean and oil........................................................
Brush both cutting blades.....................................
Replace bent or dull needle(s)..............................
Replace upper cutting blade.................................
Upper cutting blade not engaged correctly...........
Upper cutting blade not attached correctly...........
Cutting width dial not set correctly........................
Upper cutting blade not attached correctly...........
Brush both cutting blades.....................................
Replace upper cutting blade.................................
Check instant rolled hem device position.............
Recheck all threading points...........................
Cutting width dial not set correctly........................
Check instant rolled hem device position.............
26-34
36-42
16
16
46
20
58
24
26-34
36-42
26
30
20
24
56
54
26
20
56
46
16
16
26-34
66
54
36-42
26
18
44
14
66
14
66
66
16
68
18
68
58
68
66
68
22
26-34
58
22
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna 344 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna 344 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info