614470
52
Zoom out
Zoom in
Previous page
1/56
Next page
50
TROUBLESHOOTING
Condition Cause See page(s)
The machine is noisy
and does not run
smoothly.
1. Threads have been caught in the hook area.
2. The feed dog is packed with lint.
48-49
48-49
The needle thread
breaks.
1. The needle is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is not inserted correctly.
5. The thread is either too heavy or too fine for the needle.
6. The threads are not under the presser foot when sewing begins.
17
8
12
12
12
23
The bobbin thread
breaks.
1. The bobbin thread is not threaded correctly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
16
48-49
replace bobbin.
The needle breaks. 1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The needle is too fine for the fabric being sewn.
6. The stitch selection knob has been turned while the needle was in
the fabric.
12
12
12
8
12
21
Skipped stitches.
1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle and/or the thread are not suitable for the fabric being
sewn.
4. A stretch needle is not being used for sewing stretch, very fine and
synthetic fabrics.
5. The needle thread is not threaded properly.
12
12
12
12-13
17
The seam puckers. 1. The needle thread tension is too tight.
2. The machine is not threaded correctly.
3. The needle is too large for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure dial is not set correctly.
6. Threads have been caught in the hook area.
Place lightweight tearaway stabilizer under lightweight fabrics.
8
17
12
22, 23
6
48-49
The stitches form
loops underneath the
fabric.
1. The needle thread tension is too loose.
2. The needle is either too large or too small for the thread.
8
12
The fabric does not
feed smoothly.
1. The feed dog is packed with lint.
2. The pressure foot dial is not set correctly.
3. The stitches are too short.
4. The correct presser foot is not being used.
5. The feed dog is lowered.
48-49
6
22, 23
20
9
The machine does not
work.
1. The machine is not plugged in.
2. A thread is caught in the hook area.
3. The bobbin winder spindle is in the winding position.
10
48-49
14-15
The buttonhole is not
correct.
1. The stitch length is not suitable for the fabric being sewn.
2. Interfacing is not being used with fabrics.
3. Fine adjustment lever for buttonhole is not set properly.
12
33-36
34
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna 3210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna 3210 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna 3210

Elna 3210 User Manual - English, German, French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info