741417
1
Zoom out
Zoom in
Previous page
1/4
Next page
SIRENA PER INTERNO HPA100 - HPA100F
INTERNAL SOUNDER HPA100 - HPA100F
ESEMPIO SCHEMA COLLEGAMENTO
CONNECTIONS DIAGRAM
ITALIANO
ENGLISH
CARATTERISTICHE TECNICHE
• Tensione nominale di alimentazione ..................12 o 24 V─
• Tensione di funzionamento ................................10,5 ÷ 30 V─
• Assorbimento max.in allarme .............................260 mA
• Frequenza (doppia tonalità): ..............................3500 3700 Hz
• Pressione acustica ............................................110 dB(A) @ 1m
• Microswitch antiapertura ....................................1A @ 24V
• Temperatura di funzionamento .........................-10°C ÷ +55 °C
• Grado di protezione involucro ...........................IP41
• Dimensioni (L x H x P) .......................................145 x 100 x 42 mm
Modello HPA100 in contenitore bianco.
Modello HPA100F in contenitore rosso per uso segnalazione antincendio.
Disponibile versione autoalimentata HPA100A.
INSTALLAZIONE
Per installare le sirene famiglia HPA100 fare quanto segue:
1) Rimuovere i tappi di copertura e svitare le viti.
2) Utilizzare una delle predisposizioni “A” per il passaggio cavi
evidenziate in figura sfondando la parete. Se necessario rimuovere la
scheda elettronica agendo sui due gancetti “B”. Sono anche disponibili
delle predisposizioni per ingresso cavi da canalina sui lati del
contenitore.
3) Fissare il fondo della sirena utilizzando i fori “C” in caso di fissaggio a
parete o i fori “Din caso di fissaggio su scatola da incasso.
4) Collegare la sirena alla centrale.
5) Richiudere il coperchio della sirena.
CONNESSIONI
+
POSITIVO DI ALIMENTAZIONE
-
NEGATIVO DI ALIMENTAZIONE
TAMPER
CONTATTO ANTI-APERTURA
TECHNICAL FEATURES
Rated supply voltage ........................................ 12 or 24 V─
• Operating voltage ............................................. 10,5 ÷ 30 V─
Max current in alarm ......................................... 260 mA
Working frequency (dual tone) .......................... 3500 3700 Hz
Acoustic pressure ............................................. 110 dB(A) @ 1m
Anti-opening/anti-removal micro-switch ............. 1A @ 24V
Working temperature ....................................... -10°C ÷ +55 °C
Case protection degree .................................... IP41
Dimensions (w x h x d) ...................................... 145 x 100 x 42 mm
Model HPA100 in white casing.
Model HPA100AF in red casing for fire signalling.
Also available a self-powered model HPA100A.
INSTALLATION
To install the HPA100 family sounders perform the following operations:
1) Remove the screw caps and release the screws.
2) Utilize one of the planned cable entry holes A. If necessary release
the electronic board from the ledge “B” and remove it. There are
other pre-fractured holes on three side of the box for cable trunking /
rigid pipe.
3) Fix the bottom of the siren utilizing “C” holes in case of wall mounting,
or “D” holes in case of 3 modules box.
4) Lay the sounder to the control panel.
5) Close the sounder cover.
CONNECTIONS
+
POWER SUPPLY: POSITIVE POLE
-
POWER SUPPLY: NEGATIVE POLE
TAMPER
TAMPER CONTACT
DS80HP93-001B LBT80644
Tappi copertura / Screw caps
24 H
+
-
TAMPER
( RELE' DI ALLARME NORMALMENTE ECCITATO )
CENTRALE
HPA100
C NO NC
+ SIR -
CONTROL PANEL
( RELAY NORMALLY POWERED )
Made in CHINA
ELKRON
Tel. +39.011.3986711 FAX +39.011.3986703
www.elkron.com - mail to: info@elkron.it
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elkron HPA100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elkron HPA100 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info