571811
21
Zoom out
Zoom in
Previous page
1/22
Next page
4.0 BEDIENINGSVOORSCHRIFTEN
De waakvlam is zichtbaar achter de linkerzijde van de brander.
Modellen Picasso, Appel en Van Ruysdael
De regelknop bevindt zich aan de linkeronderzijde van de
behuizing, is bolvorming en is voorzien van de symbolen zoals
afgebeeld in figuur 1.
Modellen Matisse
De regelknop bevindt zich in het midden van het toestel en wordt
bereikt door het paneel onder het glas, aan de voorzijde van het
toestel te openen. Het voorframe is op dat moment niet
gemonteerd. De regelknop is voorzien van de symbolen zoals
afgebeeld in figuur 2.
Druk de regelknop in, draai deze naar de VONK-positie, en houd
deze gedurende enkele seconden in deze stand. Draai de knop
verder tegen de klok in tot aan de WAAKVLAM-positie (u hoort
een klik), en controleer of de waakvlam aanstaat. Zo niet, draai de
knop dan terug met de klok mee en herhaal de procedure.
Wanneer na de vonk de waakvlam verschijnt, houd dan de knop
ongeveer tien seconden ingedrukt. Laat nu de knop los en de waakvlam moet blijven
branden. Als de waakvlam tijdens gebruik uitgaat, wacht dan drie minuten alvorens de
ontstekingsprocedure te herhalen.
Om naar de instelling HOOG te gaan, dient u de regelknop lichtjes in te drukken en tegen
de klok in naar de HOOG-positie te draaien. De hoofdbrander moet na enkele seconden
gaan branden. Om de instelling te veranderen naar LAAG, draait u de regelknop met de
klok mee naar de lage instelling.
Om vanuit de posities HOOG of LAAG naar de WAAKVLAM-positie te gaan, drukt u de
regelknop in, draait deze naar de waakvlampositie en laat hem weer los. Om het vuur
UIT te schakelen, houdt u de knop ingedrukt, draait deze naar de UIT-positie en laat hem
weer los.
5.0 VERBRANDINGSBEWAKINGSSYSTEEM
Dit toestel is uitgerust met een verbrandingsbewakingssysteem (ODS). Als een deur of
raam open staat waardoor tocht veroorzaakt wordt, kan de waakvlam uitgaan.
Verwijdering van de tocht zou dit probleem op moeten lossen. Het toestel kan dan
opnieuw ontstoken worden volgens de procedure in de vorige sectie.
Indien verstoring van de waakvlam niet de oorzaak is, kan het zijn dat het ODS
verbrandingsbewakingssysteem in werking is. Schakel het toestel uit en laat het toestel
en de ventilatie controleren door uw installateur. Neem de nodige maatregelen om het
probleem op te lossen. Gebruik het toestel NIET totdat het toestel en de installatie veilig
zijn verklaard. Indien de waakvlam nog steeds uitgaat, dient u uw installateur te laten
komen om de werking van het complete toestel te controleren.
Figuur 1
Positie ‘UIT’
Positie ‘VONK’
Positie ‘LAAG’
Positie ‘HOOG’
Figuur 2
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Element4 MATISSE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Element4 MATISSE in the language / languages: Dutch as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info