600929
1
Zoom out
Zoom in
Previous page
1/4
Next page
RJ401 - Temperaturschalter
RJ401 - (für die DIN-Leiste) dient als Temperaturschalter mit einstellbarer Hysterese (zum Bei-
spiel zur Schaltung einer Kreislaufpumpe bei eingegebener Temperatur und zum anschließenden
Stoppen der Pumpe bei der Temperatursenkung um die vorgegebene Hysterese).
Die Einschalttemperatur wird mittels des Knopfes Temp ( 20°C bis 80°C) und die Hysterese mit-
tels Hys ( 2°C bis 35°C ) eingestellt, siehe Abb. 1. Nach dem Anschluss des Temperatursensors
an die Klemmenleiste CT1 und nach der mechanischen Befestigung des anderen Endes des
Sensors am Objekt, wo wir die Temperatur messen wollen, können wir die Anlage an das elektri-
sche Netz anschließen. Nach dem Anschluss an das Netz leuchtet an der Anlage die LED-Diode
auf, welche die Versorgungsspannung (PWR) anzeigt.
Beispiel: Auf dem Knopf Temp ist 40°C und auf dem Knopf Hys ist 2°C eingestellt. Wenn die
Temperatur jenes Objektes, an welchem die Temperatur abgetastet wird, über 40°C steigt, kommt
es zur Kontaktgabe des Relais RE1, welches zum Beispiel die Kreislaufpumpe schalten kann.
Nach der Schaltung der Pumpe beginnt das Warmwasser zu strömen. Sobald die Wassertempe-
ratur um die eingestellte Hysterese (unter 38°C) fällt, schaltet das Relais RE1 ab, und die Pumpe
wird gestoppt. Nach der Wiedererwärmung des Wassers über 40°C erfolgt erneut die Kontaktga-
be des Relais RE1 und der ganze Prozess wiederholt sich.
Funktionsumschalter - Funktionen:
Stellung ON - Relais RE1 ist ständig gekoppelt
(ungeachtet der Temperatur)
Stellung OFF - Relais RE1 ist ständig
ausgeschaltet (ungeachtet der Temperatur)
Stellung AUTO - Das Relais RE1 schaltet bei
der eingestellten Temperatur mittels des
Knopfes Temp
LED-Anzeige:
PWR - zeigt die Versorgungsspannung an
RE1 - zeigt die Kontaktgabe des Relais RE1
Zustände der LED-Anzeigen:
PWR:
(leuchtet) - angeschlossene
Versorgungsspannung
RE1:
(leuchtet) - Kontaktgabe des Relais
RE1
RE1:
(blinkt) - abgeschalteter Sensor
oder Überschreitung
des zulässigen
Temperaturbereichs
Technische Parameter
Stromversorgung 230 V AC/50Hz
Verbrauch < 0,5 W
Arbeitstemperatur 0 bis 50°C
Regelbereich 20 bis 80°C
Hysterese 2 bis 35°C
Ausgang Relais
Geschalteter Strom max. 5A/AC1
Typ des Kontaktes Umschaltkon-
takt
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektrobock RJ 401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektrobock RJ 401 in the language / languages: German as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info