600922
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
Make your choice with the / buttons according to the appli-
cation type and press
MENU
to confi rm.
- - - The external sensor, if connected, measures the temperature
at the point of location (suitable, for instance, for bathrooms,
where you wish to have a warm fl oor irrespective of the
room temperature);
15…99,5°C The external sensor, if connected, monitors the fl oor
temperature; the maximum permissible temperature is set
for the fl oor heating (you regulate with the room
temperature, monitoring the fl oor temperature
at the same time).
If the preset limit temperature is exceeded, the thermostat is switched off irrespective of
the room temperature, and the STOP message appears on the LCD. Once the external
sensor temperature drops by 0.5 °C, the heating device is switched on again.
If the sensor is not connected or it is defective, the C2.Err error message appears on the
LCD.
After connecting the external sensor, it is NECESSARY
to RESET the device (see parameter 5)!
This use of the sensor is indicated by the sign on the LCD.
The fl oor (monitoring) sensor is indicated by the sign on the LCD.
3
EXTERNAL SENSOR SELECTION
4
5
FIRMWARE VERSION / DEFAULT SETTING RECOVERY
SELECTION THE POWER OF CONNECTED DEVICE
Set the input of the connected device in watts.
Can be selected in the range from 0 to 2700 W in steps of
100 W, maximum power is 2760 W. Choosing this constant is
achieved more accurate regulation. For a given power starts
automatic calibration of the thermostat.
Set the value by / buttons and press the
MENU
.
Use the option 0 for : boiler, thermoelectric valve, contactor, etc. (for input power less
than 100 W).
Information on the fi rmware version. If you keep pressing the
button (approx. 3 sec), the RESET message appears briefl y
on the LCD, and the thermostat recovers the default setting!
You can exit the CONST mode at any time by simultaneously pressing the
MENU
and /
buttons (return to the basic mode).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektrobock PT 712EI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektrobock PT 712EI in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elektrobock PT 712EI

Elektrobock PT 712EI User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info