600919
5
Zoom out
Zoom in
Previous page
1/6
Next page
PROGRAMMING
SELECT dAY
TIME CHANGES
CONSTANTS
ENGLISH
HYSTERESIS
VERSION
5
PROG
CONST
Setting the control parameters.
1
2
3
CESKY
The hysteresis can be set from 0,1 to 6°C. Example: If the hys-
teresis is 1 °C and the required temperature 20 °C, the thermostat
switches off at 20 °C and on again at 19 °C.
4
VERSION (restoring the default settings)
Press twice the “ MENU “ button, choose the CONST mode by
turning the “ “ button, and press the “ “ button to confi rm.
Language selection (CZ/PL/EN/DE).
Choose the language by turning the “ “ button and press the
“ button to confi rm.
HYSTEREZE
Set the value by turning he “ “ button and press the “ “ button
to confi rm.
TEST
We recommend you to use the test when you fi rst use the
thermostat!
After you turn the “ “ button, the test starts and the output relay
is switched on/off several times (the display shows the ON/OFF
message). Pressing the “
“ button, you can view the next
constant; to return to the main menu, press the “
“ button.
Firmware version, informative parameter only.
If you press the “
“ button long (for about 3 s), the RESET
message appears shortly on the LCD and the thermostat returns
to the default settings!
(CONSTANTS)
(Czech language set by default)
(0.5°C set by default)
Setting the weekly program with up to 6 changes per day.
Press twice the “ MENU “ button, choose the PROG mode by turning the
“ button, and press the“ “ button to confi rm. The number of days
to be programmed is blinking on the display; choose one of the
options by turning the “
“ button (you can program day-by-day or 1-5 =
Mon-Fri, 6-7 = Sat-Sun or 1-7 =Mon-Sun) and press the “
“ button to
confi rm. The 1st change time starts fl ashing; set the time by turning the
button and press the “ “ button to confi rm. Set the temperature
for this time by turning the “
“ button and press again the “ “ button
to confi rm. The 2nd change time appears on the display. Proceed in the
same way as with the fi rst change setting. In this way, you can set up to
6 temperature changes per day. To return to the menu, press the
“.button.
After changing the preset program, check whether all the changes made
conform to your requirements!
It is not necessary to apply all six changes in one day!
(PROGRAMMING)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektrobock PT 22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektrobock PT 22 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elektrobock PT 22

Elektrobock PT 22 User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info