Manual Elektrobock BPT710 (page 7 of 10) (English)

600911

Zoom out

Zoom in

1/10

Set the pertinent value with the / button; conﬁ rm it with the

button.

It is used for correcting the temperature measured by the thermostat. We

recommend that you do the setting after 12-hour operation when the inter-

nal sensor temperature settles. Measure the room temperature with a ther-

mometer; if it differs from the thermostat temperature, set the correction

within the range of -5°C to +5°C.

CURRENT TEMPERATURE CORRECTION

To enable this function, set the „ A“ option with the / button and

conﬁ rm it with the

button. To disable, choose the „ -“ symbol and

conﬁ rm it with the

button.

If the room temperature drops suddenly (by 1-2 °C in 2 minutes), BPT710

sends out a signal to switch off the heaters to save energy in this way.

“OPEN WINDOW” FUNCTION

If the function is active, the UtLUM message appears on the display.

The mode is terminated if the temperature rises, or after 30 minutes.

If you do not want to activate another receiver, simultaneously press the

and / buttons to return to the basic mode.

This function is used for activation of up to 9 receivers.

ACTIVATION OF RECEIVERS

The display shows tESt 1-, where 1 indicates the sequence of the activated

receiver. Press the „FUNCTION BUTTON“ on the receiver (for about

1.5 s), thus you introduce the receiver into the learning state (see the

pertinent receiver manual – BPT001, BPT002 or BPT003). The LED1 and

LED2 diodes are ﬂ ashing alternately on the receiver. Press the button

on the BPT710 transmitter; tESt On 1A/tESt OFF 1A appears on the LCD

and the code is send to the receiver. Code acceptance is conﬁ rmed on the

receiver by simultaneously ﬂ ashing diodes, thus the activation is comple-

ted. To activate the next receiver, proceed in a similar way.

Choose another receiver with the button, tESt 2- appears on the

LCD. Introduce the next receiver into the learning state by pressing the

„FUNCTION BUTTON“ (for about 1.5 s) and start the activation with the

button on BPT710. In this way, you can gradually activate up to

9 receivers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elektrobock BPT710 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elektrobock BPT710

Elektrobock BPT710 User Manual - German - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elektrobock BPT710 Manual

Product: