633190
6
Zoom out
Zoom in
Previous page
1/8
Next page
E50
Instructions For Use. Page 6
down and will stop automatically when a
station is detected.
Press “TUNE UP ” or “TUNE
DOWN ” to search for the next station.
Press the MANUAL/AUTO button
again, the indicator above it will turn off,
indicating MANUAL MODE.
In this mode the E50 can be tuned
manually by using the “TUNE UP ” or
“TUNE DOWN ” buttons to alter the dis-
played frequency in single steps.
TUNE UP /TUNE DOWN
BUTTONS
These buttons are used to tune sta-
tions in the Auto and Manual tuning
modes. Pressing up will tune from the bot-
tom of the range, around the 89MHz. fre-
quency, up to the top of the band, around
108MHz.
TUNED INDICATORS
(OFF) (ON)
This indicator, which is located on the
left of the row of buttons beneath the dis-
play panel, will light when the E50 is cor-
rectly tuned to a station.
MONO/STEREO BUTTON
When receiving a stereo station the
indicator to the right of this button will
light, denoting stereo operation.
If mono operation is required, then
press this button once. The indicator will
turn off, your E50 is now in MONO mode.
To return to STEREO mode, press
the button once more. The indicator above
it will turn on, your E50 is now in
STEREO mode.
Note: Mono operation should be
selected in areas of weak signal
strength to reduce background noise.
MEMORY BUTTON
To enter a station in the preset
memory please proceed as follows:-
1 Tune to the station required.
2 Press memory button once. The
MEMORY indicator within the frequency
display will light for approximately 5 sec-
onds.
3 While the indicator is lit, press one
of the station memory buttons. The indi-
cator will turn off and the station will now
be stored in the preset memory correspond-
ing to the button pressed. The number of
the preset button pressed will be displayed
in the frequency display e.g. button 5 will
be indicated as CH5.
RANDOM PRESET MEMORY
BUTTONS
These 10 buttons are used to program
broadcast stations into the memory and
recall them. To recall preset channels 1-
10, press the required button momentar-
ily; to recall preset channels from 11-20,
press for 1 second or longer.
MEMORY SCAN BUTTON
When the button is pressed, the pre-
set stations stored in the memory will be
scanned in sequence at 5 second intervals.
When this button is pressed again, the
scanning will stop at the current station.
BASIC OPERATION
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elektra E50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elektra E50 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info