Manual Electrolux esf 66710 x (page 93 of 96) (English, German, Dutch, French)

126275

Zoom out

Zoom in

1/96

By removing the machine's worktop, you can

install it under a close fitting sink unit or a pre-

existing top, providing the dimensions of the

recess correspond to those shown in the

picture.

Proceed as follows:

• Remove the machine’s worktop by un-

screwing the two rear retaining screws (1),

pull the worktop from the back of the ma-

chine (2) and slide out the front slots, lifting

the worktop (3).

Insert the machine after adjusting the level-

ling with the adjustable feet. When inserting

the machine, ensure that the water inlet and

drain hoses are not kinked or squashed.

During all operations that involve accessibility

to internal components the dishwasher has

to be unplugged.

Be sure that once the appliance has been in-

stalled, it is easily accessible for the service

engineer in the event that a repair is required.

If the dishwasher is later used as a free-

standing appliance, the original worktop

must be re-mounted.

The plinth on free-standing appliances is not

adjustable.

Levelling

Good levelling is essential for correct closure

and sealing of the door.

When the appliance is correctly levelled, the

door will not catch on either side of the cab-

inet .

If the door does not close correctly, loosen

or tighten the adjustable feet until the ma-

chine is perfectly level.

Water connection

Water inlet connection

This appliance can be connected to either a

hot (max. 60°) or cold water supply.

With a hot water supply you can have a sig-

nificant reduction of energy consumption.

This however, depends on how the hot water

is produced. (We suggest alternative sources

of energy that are more environmentally

friendly as e.g. solar or photovoltaic panels

and aeolian).

For making the connection itself, the cou-

pling nut fitted to the appliance water inlet

hose is designed to screw onto a 3/4" thread

spout or to a purpose made quick-coupling

tap such as the Press-block.

The water pressure must be within the limits

given in the 'Technical data'. Your local Wa-

ter Authority will advise you on the average

mains pressure in your area.

The water inlet hose must not be kinked,

crushed, or entangled when it is being con-

nected.

The appliance features inlet and drain hoses

which can be turned either to the left or the

electrolux 93

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Electrolux esf 66710 x in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Electrolux esf 66710 x Manual

Product: