561024
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
Installation
5.) If you want to use a jig saw for cutting out the circle, you
should drill a suitable hole first in which the jig saw blade fits
easily in.
Please take care of drilling the hole within the circle.
6.) Prepare the ceiling cut-out by means of a sharp knife (suitable
for the most lightweight walls) or a (electrical) jig saw (suitable for
most other wall- or ceiling-materials)
7.) The result is shown in this picture. The cable ends with a
length of approx. 35-40 cm will come out of the hole.
8.) Connect the loudspeaker cables to the jacks of the In-Ceiling
loudspeaker that are on the rear side of the speaker.
The correct polarity is important here (marked wire = positive pole,
must be connected to red terminal, negative pole = must be
connected to black terminal). Press on the terminal and insert the
cables through the hole on the side of the terminal and release the
terminal again.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elac IC1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elac IC1010 in the language / languages: English, German as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info