461631
6
Zoom out
Zoom in
Previous page
1/34
Next page
6
For your own safety, please read these
instructions carefully before you use
the heater for the first time.
Keep the instructions in a safe place
and consult them whenever necessary.
CAUTION! DANGER!
The emissions from this appliance are dangerous if
they are allowed to accumulate. It is prohibited to use
the appliance in any inhabited rooms.
Einhell cannot be held liable for non-observance of
the regulations and specifications laid down in these
instructions for use.
Description of the appliance:
Components: (Figure A)
1. Burner bracket
2. Radiator
3. Spring washer
4. Wing nut
5. Snug bolt
6. Gas pipe
7. Pressure regulator
8. Union nut
9. Safety tap
10. Knob
11. Clamping screw
12. Gas bottle valve
13. Bottle valve thread
14. Ignite here!
Features
A mobile gas radiant heater for use in uninhabited
rooms.
Technical data
Heat output: 4.6 kW - 2.7 kW (max.-min.)
Gas consumption: 336 g/h - 200 g/h (max.-min.)
Category: I 3 B/P (50)
Gas and pressure: butane gas 50 mbar
propane gas 50 mbar
Nozzle code: 0.90
Important:
This appliance works with 5 kg and 11 kg bottles of
butane or propane gas that are fitted with a pressure
regulator (50 mbar) in accordance with the
specifications of DIN 4811-T1.
It is to be used with a standardized pipe in
accordance with the specifications of DIN/DVGW
4815-2, maximum length 50 cm.
The pipe and the pressure regulator can be
purchased separately.
This appliance is to be used only outdoors and only
for heating purposes.
Installing the appliance
Ȝ Always use in well ventilated rooms, far away
from flames, sparks or combustible materials.
Ȝ Fasten the burner bracket (1) to the appliance
using the snug bolt (5), the spring washer (3) and
the wing nut (4) (see Figure A).
Ȝ The angle of the radiator can be infinitely adjusted
with the wing nut (4). Bottom and rear positions
are limited by a lug on the bracket.
Mounting the appliance on the gas
bottle
Ȝ Place the appliance on the bottle so that the
projecting clamping screw (11) fits inside the front
open part of the bottle collar.
Ȝ Tighten the clamping screw (11) so that the two
metal tips of the burner bracket (1) and the tip of
the clamping screw enclose the neck of the bottle
snugly, then tighten fully.
Ȝ Tighten the clamping screws, making sure that
they also engage in the groove around the bottle
neck.
Ȝ Slip the gas pipe (6) with self-cutting coupling on
the stub of the safety tap (9) and screw tight.
Ȝ Screw the other end of the pipe tightly to the
pressure regulator (7).
N.B.: Left-hand thread.
Ȝ Connect the union nut (8) of the pressure
regulator with the bottle valve thread (13) by
turning anticlockwise. Turn the union nut by hand
without the use of any tools or the bottle valve
seal may be damaged and jeopardize leak-proof
operation.
Ȝ Make sure there are no cracks in the pipe and no
contact between the pipe and the radiator (2).
Ȝ When the assembly work is completed, open the
gas bottle valve and check for leaks at all the
connection points using a foaming agent.
CAUTION!
Checking for leaks with an open flame is strictly
prohibited!
GB
Anleitung GS 4600- 12 spr. 02.11.2001 8:24 Uhr Seite 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell GS 4600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GS 4600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info