Manual Einhell CE-JS 12-1 (page 20 of 134) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

831209

Zoom out

Zoom in

1/134

- 20 -

At very low temperatures a number of jump start

attempts may be required before the car starts up.

Allow one minute waiting time between each att-

empt. Remove the equipment within 30 seconds

after a successful jump start as far as possible.

The number of times that you can attempt to start

the engine (max. 4 within 10 minutes) varies ac-

cording to the ambient temperature, the condition

of the battery you want to start and the charge

level of the jump start power bank battery.

If too many attempts to start are carried out within

10 minutes, the “Correct” LED will ﬂ ash green /

red in alternation and further attempts to start will

be blocked. The jump start function will become

available again after a 10-minute waiting period

provided the battery has enough capacity and the

integrated safety device is compliant.

9. Cleaning, maintenance and

ordering of spare parts

Danger!

Always pull out the power plug before starting any

cleaning work.

Remove all the connected cables from the jump

start power bank.

9.1 Cleaning

• Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

• We recommend that you clean the device

immediately each time you have finished

using it.

• Clean the equipment regularly with a damp

cloth. Do not use cleaning agents or solvents;

these could attack the plastic parts of the

equipment. Ensure that no water can seep

into the device. The ingress of water into an

electric tool increases the risk of an electric

shock.

9.2 Maintenance

There are no parts inside the equipment which

require additional maintenance.

9.3 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

• Type of machine

• Article number of the machine

• Identification number of the machine

• Replacement part number of the part required

For our latest prices and information please go to

www.Einhell-Service.com

10. Repair

Should the tool experience problems beyond

those mentioned above, let only an authorised

professional or a customer service shop perform

an inspection.

11. Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw

materials in this packaging can be reused or

recycled. The equipment and its accessories are

made of various types of material, such as metal

and plastic. Never place defective equipment in

your household refuse. The equipment should

be taken to a suitable collection center for proper

disposal. If you do not know the whereabouts of

such a collection point, you should ask in your

local council oﬃ ces.

12. Storage

Store the equipment and its accessories in a dark

and dry place at above freezing temperature.

The ideal storage temperature is between +5 and

40°C.

Observe the enclosed safety information with

detailed information about storage. Since the bat-

tery reacts if the temperature is too high (above

+40°C) or too low (below 0°C), do not keep the

battery permanently in a vehicle. For transporting

in a vehicle, place the equipment in a suitable

location where it cannot move in response to an

abrupt change in speed and/or direction. Keep

the equipment in its original packaging.

Anl_CE_JS_12_1_SPK9.indb 20Anl_CE_JS_12_1_SPK9.indb 20 27.01.2021 11:13:4727.01.2021 11:13:47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell CE-JS 12-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell CE-JS 12-1 Manual

Product: