573476
6
Zoom out
Zoom in
Previous page
1/17
Next page
4
Description
1 Power cable
2 Locking button
3 On/Off switch
4 Knurled screw for regulating the speed
5 Protection guard
6 Guide roller
7 Selector switch for pendulum action
8 Adjustable base
9 Dust extractor socket
General safety and accident prevention
regulations
To work safely with this machine and to prevent acci-
dents it is imperative to read the following safety
regulations and operating instructions in full and to
put all the information into practice.
Ȝ Always check the machine, the power cable and
the plug before use. Only ever use the machine if
it is in perfect, undamaged condition. Damaged
parts are to be repaired or replaced immediately
by a qualified electrician.
Ȝ Always pull the plug out of the power socket
before carrying out any work on the machine,
before changing the tool and in periods of non-
use.
Ȝ Always run the power cable away from the back of
the machine to guard it from damage.
Ȝ For outdoors work use only suitably approved
extension cables with a minimum conductor cross
section of 1.5 mm
2
. The plug connectors must
have earthing contacts and be rain-water-proof.
Ȝ Keep the machine in a safe place and out of the
reach of children.
Ȝ Always wear goggles, safety gloves and ear muffs
when grinding, brushing and cutting. Wear a
breathing mask on dusty jobs.
Ȝ Never leave any tool keys or adjustment spanners
in position on the machine. Before switching on,
check that all keys and adjustment spanners have
been removed.
Ȝ Secure the workpiece (with a clamp) so that it
cannot slip.
Ȝ It is imperative to use a dust extractor when
working on stone (cutting or grinding). Make sure
the dust extractor is approved for stone dust.
Ȝ It is prohibited to use the machine on
asbestos materials. Please note the accident
prevention regulations in force in your country.
Ȝ Use only original spare parts.
Ȝ Repairs are to be carried out by qualified
electricians only.
Ȝ The level of noise at the workplace may exceed
85 dB(A). In this case you will need to introduce
noise protection measures for the user. The noise
produced by this electric tool is measured in
accordance with IEC 59 CO 11, IEC 704,
DIN 45635 Part 21, NFS 31-031 (84/537/EEC).
Ȝ Make sure of your footing. Avoid abnormal
working positions.
Ȝ Keep your electric tool out of the rain. Never use
electric tools in wet or damp conditions, and never
use them near inflammable liquids.
Ȝ Never carry the machine by its power cable. Keep
the power cable safe from damage. Oil, solvent
and sharp edges can damage cables.
Ȝ Keep your workplace tidy.
Ȝ Make sure the power switch is off before inserting
the plug in the socket.
Ȝ Wear suitable clothing. Never wear loose-fitting
clothes or jewelry. Use a hair-net on long hair.
Ȝ For your own safety, use only the manufacturer´s
accessories and attachments.
Ȝ Use only sharp saw blades that are in perfect
condition. Replace bent and cracked saw blades
immediately.
Ȝ After switching off the jigsaw, do not press against
the side of the blade to bring it to a halt.
Ȝ Always cut at a steady rate of progress. This will
prevent accidents and prolong the life of your jig-
saw and the blade.
GB
BPS 520 E-GB,I,FIN 10.07.2001 10:37 Uhr Seite 4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell BPS 520E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell BPS 520E in the language / languages: English, Italian, Finnish as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info