Zoom out
Zoom in
Previous page
1/42
Next page
AI-2002W
Indoor Air Quality Detector
User Manual
07-2018 / v2.0
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    AI-2002W
    Indoor Air Quality Detector
    User Manual
    07-2018 / v2.0



  • Page 2

    Content
    I

    Safety Information ................................................................................ 4

    II Product Information .............................................................................. 5
    II-1
    II-2

    Package Content............................................................................................ 5
    LED Indicator ................................................................................................. 5

    III Installation............................................................................................ 7
    III-1
    III-2
    III-3

    Android OS .................................................................................................... 8
    iOS ............................................................................................................... 12
    Deploying the Unit ...................................................................................... 16

    IV Home Screen Information and Functions...............................................19
    IV-1

    Menu ........................................................................................................... 20
    IV-1-1 Device Management............................................................................. 20
    IV-1-1-1
    Device Configuration ............................................................... 21
    IV-1-1-2
    Remove Device ........................................................................ 22
    IV-1-1-3
    Add Device Option .................................................................. 22
    IV-1-2 Show Nearby Air Quality ...................................................................... 23
    IV-1-3 HELP ...................................................................................................... 24
    IV-1-4 Information........................................................................................... 24
    IV-2
    Device Name ............................................................................................... 26
    IV-3
    Collective Air Quality Information Chart ..................................................... 26
    IV-4
    Current Air Quality Information .................................................................. 27
    IV-4-1 Change Device Name ............................................................................ 28
    IV-4-2 Choosing Air Quality Timeline .............................................................. 28
    IV-4-3 Air Quality VS Time ............................................................................... 28
    IV-4-4 Air Quality Information Chart ............................................................... 29

    V Reset to Factory Default Settings ..........................................................30
    VI Advance Feature ..................................................................................31
    VI-1

    Adding Already-Connected Devices ............................................................ 31
    VI-1-1 Scan QR Code ........................................................................................ 31
    VI-1-2 Add Via Local Network ......................................................................... 32

    VII Cleaning the Unit .................................................................................34
    VII-1

    Air Pump Cleaner......................................................................................... 34
    2



  • Page 3

    VII-2

    Dust-off Canned Compressed Air ................................................................ 35

    3



  • Page 4

    I

    Safety Information

    For effective sensing and retrieval of environmental data, please install the
    unit with the safety restrictions outlined below:
    -

    Must be in locations with good air circulation.
    Must be positioned for proper air intake to achieve cross ventilation.
    The air inlet must be kept clear and should be rechecked regularly.
    Must be in locations close to a power supply and has good Wi-Fi internet
    signal capable of connecting to the Internet 24 hours a day, 7 days a week.
    Must not be installed in locations that are subject to extremes of humidity
    or temperature such as near fire or other heat sources.
    Must not be installed in locations directly exposed to sunlight or reflected
    light source.
    Must not be installed in corrosive environments such as in environments
    with salty, acidic or basic air, or places with storage of corrosive liquids.
    Do not inject gas, contaminants, or smoke directly into the unit, or install
    the unit in a location prone to the aforementioned actions.

    Unable to follow the above-mentioned guideline may reduce machine
    lifetime.

    4



  • Page 5

    II

    Product Information

    II-1

    Package Content

    Air Quality Detector

    Device Stand

    Power Adapter (12V/1A)

    II-2

    Quick Installation Guide

    CD with User Manual

    LED Indicator
    LED

    Color
    Red

    System Status

    PM2.5
    HCHO
    TVOC
    CO2
    Consolidated
    Air Quality

    Green
    Blue
    Green
    Yellow
    Orange
    Red
    Purple
    Green
    Red

    LED Status Description
    Flash
    On
    Flash
    On
    On

    On

    On

    Waiting to be wirelessly paired
    Device is booting up
    Wi-Fi is operational but not connected
    Wi-Fi setup successful
    Device connected to the Internet
    Air quality: Good
    Air quality: Moderate
    Air quality: Unhealthy for Sensitive Groups
    Air quality: Unhealthy
    Air quality: Hazardous
    Consolidated air quality: Good
    Consolidated air quality: Unhealthy

    5



  • Page 6

    Turning LED On / Off
    Air quality LEDs and consolidated air quality LED can be turned on or off. By
    default, the LEDs are turned on.
    To turn on / off the LEDs, press and hold the center button for 5 seconds.

    System Status LED will always be on (flashing or stayed on) when the unit
    is powered.

    6



  • Page 7

    III

    Installation

    This section will guide you through the steps to connect your air quality
    detector to the Internet.

    1.
    iOS

    Android

    Search and download "EdiGreen
    Home" in Apple App Store or Google
    Play.
    Alternatively, scan the QR code on the
    left (choose your device's OS
    correctly).

    2.

    Please connect the power adapter to
    the unit (demonstrated on the left)
    and a power socket.

    3.

    Please wait a moment for the device to
    boot up. Proceed to the Internet
    connection procedure when the
    System Status LED starts flashing in
    Red.

    For Internet connection procedure, please follow the instructions below
    according to your mobile device (III-1 Android OS or III-2 iOS).

    7



  • Page 8

    III-1 Android OS
    Please make sure…
    A. "Access to my location" is turned on.
    B. Your mobile device is able to connect to your
    home's Wi-Fi network (such as the "test_5" network
    shown on the right) or whichever network you
    anticipated the detector to connect to. Please make
    sure this network has internet connectivity.

    1.

    Before starting the EdiGreen Home App, go to
    your mobile device’s Wi-Fi settings and connect to
    the Wi-Fi SSID of your detector (AirBox.Setup.**).
    Please find the unique SSID of your detector on the
    product label. The final 2 digits ** of the SSID
    "Airbox.Setup.**" is the final two digits of the detector's
    MAC address.

    8



  • Page 9

    2.
    3.

    Open the EdiGreen Home App.

    4.

    The app will start searching for available Wi-Fi
    network for the detector.

    Tap "Setup".

    If you cannot find the desired Wi-Fi network SSID, tap
    to refresh network list. Alternatively, tap "Connect
    to a hidden network" to manually connect to the desired
    Wi-Fi network.

    5.

    Tap the desired Wi-Fi network.

    6.

    Enter the Wi-Fi network password and tap
    continue.

    9

    to



  • Page 10

    Please wait a moment for the setup process.

    7.

    Enter a device name, password, and confirm the
    password.

    8.

    Tap "Yes" to continue.

    Setup Complete! Please wait a moment for the app to
    take you back to its home screen.

    10



  • Page 11

    Congratulations! Your air quality
    detector is up and running!
    The home screen is as shown on the
    left.
    The system status LED should be turned
    on in blue.
    Now you are able to monitor the air
    quality near your unit with your mobile
    device anywhere (as long as you have
    access to the Internet).

    CO2 and TVOC sensors require up to 72 hours to self-calibrate after the
    installation.

    11



  • Page 12

    III-2 iOS
    Please make sure…
    A. "Access to my location" is turned on.
    B. Your mobile device is able to connect to your
    home's Wi-Fi network (such as the "test" network
    shown on the right) or whichever network you
    anticipated the detector to connect to. Please make
    sure this network has internet connectivity.

    1.

    Before starting the EdiGreen Home App, go to
    your mobile device’s Wi-Fi settings and connect
    to the Wi-Fi SSID of your detector
    (AirBox.Setup.**).
    Please find the unique SSID of your detector on
    the product label. The final 2 digits ** of the SSID
    "Airbox.Setup.**" is the final two digits of the
    detector's MAC address.

    12



  • Page 13

    2.
    3.

    Open the EdiGreen Home App.

    4.

    The app will start searching for available Wi-Fi
    network for the detector.

    Tap "Setup Device".

    If you cannot find the desired Wi-Fi network SSID,
    tap
    to refresh network list. Alternatively, tap
    "Connect to a hidden network" to manually connect
    to the desired Wi-Fi network.

    5.

    Tap the desired Wi-Fi network.

    6.

    Enter the Wi-Fi network password and tap “OK”
    to continue.

    13



  • Page 14

    Please wait a moment for the setup process.

    7.

    Enter a device name, password, and confirm the
    password.

    8.

    Tap "OK" to continue.

    Setup Complete! Please wait a moment for the app to
    take you back to its home screen.

    14



  • Page 15

    Congratulations! Your air quality
    detector is up and running!
    The home screen is as shown on the
    left.
    The system status LED should be turned
    on in blue.
    Now you are able to monitor the air
    quality near your unit with your mobile
    device anywhere (as long as you have
    access to the Internet).

    CO2 and TVOC sensors require up to 72 hours to self-calibrate after the
    installation.

    15



  • Page 16

    III-3 Deploying the Unit
    After connecting to the Internet (and your mobile device's EdiGreen Home
    app), you can choose how to place your air quality detector.

    Rubber Legs
    Simply place the unit with the center button facing upwards on a bench or flat
    surface.
    The rubber legs (shown below) act as shock prevention and anti-slide support.

    Detector sitting on a bench or flat surface

    Rubber Legs

    16



  • Page 17

    Using Device Stand
    Use the Device Stand to hold the device on a surface.

    1.

    Locate the anchors on the Device Stand and the anchor holes on the
    device. Insert the anchors into the device.
    anchor holes

    anchors

    2.

    Push the anchors towards the smaller ends of the anchor holes to fix the
    Device Stand.
    smaller end of anchor hole

    17



  • Page 18

    3.

    Place the unit at your desired location in the position shown below:

    The bottom of the stand has rubber to act as anti-slide support.

    anti-slide rubber

    18



  • Page 19

    IV

    Home Screen Information and Functions

    Home screen of the app features a few simple functions and real-time data for
    users to quickly understand current air quality near the device.
    Different mobile operating systems will have slightly different display
    cosmetic-wise.

    0
    錯誤! 找
    不到參照
    來源。

    The following sections will explain

    IV-3

    錯誤!
    找不到
    參照來
    the源。
    featured

    19

    functions and information.



  • Page 20

    IV-1 Menu
    Tap

    to enter Menu as shown below:

    IV-1-1

    Device Management

    This submenu displays the device(s) added to the app.
    Users can go into one single device for further configurations or add more
    Devices to this app.

    1

    20

    2



  • Page 21

    IV-1-1-1
    Tap the

    Device Configuration
    icon to go into the configuration page shown below:
    LED
    Tap the
    icon to turn on / off the display of all air
    quality LED (Note: System Status LED is always on).
    Push Notification
    Tap the
    icon to turn on / off Push Notifications.
    FW Version
    a. Tapping
    will initiate firmware version check.
    b. If new version is available, the app will ask if you
    would like to upgrade to the newest version.

    c. Tap "OK" to continue.
    Generate QR code to share
    Tap this option to share the settings of this unit to
    other mobile devices.
    a. The app will provide a warning and remind users
    (shown on the left) of the validity period of the QR
    Code. Tap "OK" to continue.
    b. Tap "save" to save the QR code on the device.
    c. Tap "share" to share the QR code as a picture to
    user's desired medium.

    21



  • Page 22

    IV-1-1-2 Remove Device
    If you wish to remove a particular device, go to the "Device Management"
    page and swipe the name of the device to the left.

    The app will ask if you would like to remove the device as shown below:

    Tap "YES" to remove, or tap "NO" to forfeit the option.

    IV-1-1-3 Add Device Option
    Tap
    to add more devices to the app and refer to the
    steps in III Installation to add more devices.
    If you have a device attached to another mobile device's EdiGreen Home app,
    please refer to VI-1 Adding Already-Connected Devices to add this device.

    22



  • Page 23

    IV-1-2

    Show Nearby Air Quality

    Tap this option to display nearby air quality.
    The map will display AI-1001W devices in the area. If the area does not
    have any AI-1001W devices, no air quality information is displayed.

    Tap

    will bring you back to your current location on the map.

    Tap
    will display the air quality level of PM2.5 (in a chart) and information
    of other devices on the map:

    Circles displayed on the map represent the detection stations. The
    number inside the circles is the PM2.5 air quality level, as shown:
    23



  • Page 24

    Diamonds displayed on the map represent the EPA stations. The
    number inside the diamonds is the PM2.5 air quality level, as shown:
    Triangles displayed on the map represent the LASS stations. The
    number inside the triangles is the PM2.5 air quality level, as shown:

    IV-1-3

    HELP

    If you need more information, please contact your local service provider.
    Tapping "Help" will take you to the contact information page of Edimax.

    IV-1-4

    Information

    Tapping "Information" will provide "Privacy Policy" and "APP Version":
    Android
    iOS

    24



  • Page 25

    Tap "Privacy Policy" to see privacy policy:
    Android

    25

    iOS



  • Page 26

    IV-2 Device Name
    This displays the name of the device.
    If you wish to understand the air quality information around you using the
    map (), it is advisable to name your device a unique name (IV-4-1 Change
    Device Name).

    IV-3 Collective Air Quality Information Chart
    Tap

    to display the Air Quality Information Chart as shown below:

    26



  • Page 27

    IV-4 Current Air Quality Information

    Temperature and humidity is respectively displayed on top with their
    corresponding icons.
    The displayed time is the time the data was last retrieved from the server.
    The 5 figures below the retrieval time are the 5 air pollutant (PM2.5 / PM10 /
    CO2 / HCHO / TVOC) values. Tapping any of them will display its historical
    values, as exemplified below:

    III-5-1
    III-5-2

    III-5-3
    III-5-4
    27



  • Page 28

    IV-4-1

    Change Device Name

    Tap

    to change the device name

    Tap "OK" to confirm the change, or "Cancel" to forfeit the change.

    IV-4-2

    Choosing Air Quality Timeline

    Tapping any of the four options will display the air quality history on their
    corresponding timeline:

    Timeline Options:
    - 1 hour (60m)
    - 1 day (24H)
    - 1 week (7d)
    - 1 month (31d)

    IV-4-3

    Air Quality VS Time

    Users can swipe up or down to look at a particular air quality information
    against the chosen timeline.
    Examples of each air quality information against time are shown below:

    28



  • Page 29

    IV-4-4

    Air Quality Information Chart

    Tap
    to see individual air quality information.
    PM2.5 chart is shown as an example:

    29



  • Page 30

    V

    Reset to Factory Default Settings

    If you experience problems with the device, try rebooting it by reconnecting
    the power. If rebooting does not work, try resetting it back to its factory
    default settings. This resets all settings back to the default settings.

    1.

    Within 3 minutes of reconnecting power to the device, press and hold
    the center button (indicated in the picture below) for at least 10 seconds,
    where the System Status LED is turned on in Red.

    The device would not reset if you try resetting it after 3 minutes of
    reconnecting power. Please try within 3 minutes of reconnecting power.

    2.

    Please wait a moment for the device to reset. The System Status LED will
    start flashing in Red if it is ready to connect to your app and the Internet.

    30



  • Page 31

    VI

    Advance Feature

    VI-1 Adding Already-Connected Devices
    "Connected Device" referred here is defined as a detector device already
    connected to a mobile device's EdiGreen Home app.

    The EdiGreen Home App can add other connected devices. Refer to below on
    ways to add connected devices.
    VI-1-1

    1.

    Scan QR Code

    Tap
    to enter Menu  Device Management. Tap
    to enter the page shown below:

    2.

    Tap “Add new device with QR code generated”.

    3.

    The app will start up QR Code scanner. Scan the QR
    code of the QR Code generated by another mobile
    device's EdiGreen Home app.
    When the scanning is successful, the app will bring
    you to the device's home screen. Moreover, the
    device will be displayed on the "Device
    Management" page.

    31



  • Page 32

    VI-1-2

    1.

    Add Via Local Network

    Tap
    to enter Menu  Device Management. Tap
    to enter the page shown below:

    2.

    Please go to the Wi-Fi settings of your mobile device
    and connect to the Wi-Fi network the detector is
    connected to.

    32



  • Page 33

    3.

    Go back to the app and tap
    to see all the
    detectors connected to this network (exemplified on
    the left).

    4.

    Tap the unit you wish to add to your EdiGreen Home
    app.
    If you cannot find the desired unit, tap
    refresh the list.

    5.

    to

    The app will prompt you to enter the unit's
    password (this is the password entered during the
    unit's initial installation process). Enter the password
    and tap "OK" to continue.
    If you do not remember the password, you may
    choose to add the unit by scanning the QR Code;
    Alternatively, you may reset the unit and reconnect
    it to the Internet and to your mobile device's
    EdiGreen Home app.

    When the process is successful, the app will bring you to the device's home
    screen. Moreover, the device will be displayed on the "Device Management"
    page.

    33



  • Page 34

    VII Cleaning the Unit
    Choose either of the two options below depending on the cleaning tool you
    have.
    If you have other pump-like cleaning tools available (e.g. for computers),
    you may also utilize them. Please be careful to not exert extremes of
    force or temperature / humidity onto the sensors to prevent damaging
    them.

    It is recommended to clean the sensors every 3-6 months for maximum
    sensor functionality.

    VII-1 Air Pump Cleaner
    A general air pump cleaner of maximum diameter 55mm and length
    150mm will be sufficient.

    1.

    Direct the nozzle of the air pump cleaner at an opening (Figure 1 or
    Figure 2) of a sensor.

    2.
    3.

    Squeeze the bulb to blow air at the sensors.
    Do this for 5-10 times and make sure all sensor openings are cleaned.

    Figure 1

    Figure 2

    34



  • Page 35

    VII-2 Dust-off Canned Compressed Air
    A general dust-off compressed air will be sufficient.

    1.

    Direct the nozzle of the compressed air at an opening (Figure 3 or Figure
    4) of a sensor.

    2.
    3.

    Keep the nozzle at 10cm from the sensor opening.

    4.

    Make sure all sensor openings are cleaned.

    Use short bursts (1-2 seconds) of air spray a few times to clean the
    sensor.

    Figure 3

    Figure 4

    35



  • Page 36

    Federal Communication Commission Interference Statement
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
    15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
    residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
    installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
    cause harmful interference to radio or television reception, which can be determined by turning the equipment
    off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    1. Reorient or relocate the receiving antenna.
    2. Increase the separation between the equipment and receiver.
    3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    4. Consult the dealer or an experienced radio technician for help.
    FCC Caution
    Any changes or modifications not expressly approved by the party responsible for compliance could void your
    authority to operate the equipment.
    This device and its antenna must not be co-located or operating in conjunction with any other antenna or
    transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
    conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
    received, including interference that may cause undesired operation.
    Federal Communications Commission (FCC) Radiation Exposure Statement
    This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid
    the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
    less than 20cm (1 inch) during normal operation.
    RED Compliance Statement

    Compliance with 2014/53/EU Radio Equipment Directive (RED)
    In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on
    the frequency bands used and the maximum RF transmit power of the product for sale in the EU:
    Frequency range (MHz)

    Max. Transmit Power (dBm)

    WLAN Wi-FI 802.11b/g/n; 2, 4 GHz

    18 dbm

    A simplified DoC shall be provided as follows: Article 10(9)
    Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type Home Roaming Wi-Fi
    Extender is in compliance with Directive 2014/53/EU
    The full text of the EU declaration of conformity is available at the following internet
    address: http://www.edimax.com/edimax/global/
    Safety
    This equipment is designed with the utmost care for the safety of those who install and use it. However, special
    attention must be paid to the dangers of electric shock and static electricity when working with electrical
    equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
    ensure the safe use of the equipment.
    EU Countries Intended for Use
    The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
    Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
    Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
    version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
    Switzerland.
    EU Countries Not Intended for Use
    36



  • Page 37

    None
    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that may cause undesired operation.

    37



  • Page 38

    EU Declaration of Conformity
    English:

    This equipment is in compliance with the essential requirements and other relevant
    provisions of Directive 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Français:
    Cet équipement est conforme aux exigences essentielles et autres dispositions de la
    directive 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Čeština:
    Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
    směrnic 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Polski:
    Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
    określonymi Dyrektywą UE 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Română:
    Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
    Directivei 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Русский:
    Это оборудование соответствует основным требованиям и положениям Директивы
    2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Magyar:
    Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
    (2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU).
    Türkçe:
    Bu cihaz 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU direktifleri zorunlu istekler ve
    diğer hükümlerle ile uyumludur.
    Українська: Обладнання відповідає вимогам і умовам директиви 2006/95/EC, 2011/65/EC.
    Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
    2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Deutsch:
    Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/53/EU, 2014/30/EU,
    2014/35/EU, 2011/65/EU.
    Español:
    El presente equipo cumple los requisitos esenciales de la Directiva 2014/53/EU,
    2014/30/EU, 2014/35/EU, 2011/65/EU.
    Italiano:
    Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
    della Direttiva 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
    van richtlijn 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/53/EU, 2014/30/EU,
    2014/35/EU, 2011/65/EU.
    Norsk:
    Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
    2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Svenska:
    Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
    bestämmelser i direktiv 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    Dansk:
    Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
    forordninger i direktiv 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
    suomen kieli: Tämä laite täyttää direktiivien 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU
    oleelliset vaatimukset ja muut asiaankuuluvat määräykset.

    ----------------------------------------------------------------------------------------------------------------------WEEE Directive & Product Disposal
    At the end of its serviceable life, this product should not be treated as household or general waste. It
    should be handed over to the applicable collection point for the recycling of electrical and electronic
    equipment, or returned to the supplier for disposal.
    38



  • Page 39

    Declaration of Conformity
    We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
    equipment described below complies with the requirements of the European Radio
    Equipment Directive .
    Equipment: Indoor Air Quality Detector
    Model No.: AI-2002W
    The following European standards for essential requirements have been followed:
    Spectrum: ETSI EN 300 328 V2.1.1
    EMC:
    EMF:
    Safety (LVD):

    EN 301 489-1 V2.2.0
    EN 301 489-17 V3.2.0
    EN 62311:2008
    IEC 60950-1:2005 (2nd Edition)+Am 1:2009+Am 2:2013
    and/ or EN 60950-1:2006+A11:2009+A1:2010+ A12:2011+
    A2:2013

    Edimax Technology Europe B.V.
    Fijenhof 2,
    5652 AE Eindhoven
    THE NETHERLANDS

    Printed Name:
    Title:

    a company of :
    Edimax Technology Co., Ltd.,
    No. 278, Xinhu 1st Rd., Neihu
    Dist. Taipei City, Taiwan

    Vivian Ma
    Director
    Edimax Technology Europe B.V.
    Date of Signature:
    Signature:

    Jan., 2018

    Printed Name:
    Title:

    Albert Chang
    Director
    Edimax Technology Co., Ltd.

    39



  • Page 40

    Notice According to GNU General Public License Version 2
    This product includes software that is subject to the GNU General Public License version 2. The program is free software and
    distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more
    than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source
    code.
    Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das Programm ist eine sog. „Free
    Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen
    Zeitraum von drei Jahren an, eine vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu
    stellen – zu nicht höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen.
    GNU GENERAL PUBLIC LICENSE
    Version 2, June 1991
    Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
    Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
    Preamble
    The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
    Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free
    for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other
    program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser
    General Public License instead.) You can apply it to your programs, too.
    When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make
    sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive
    source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that
    you know you can do these things.
    To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
    the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
    modify it.
    For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights
    that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms
    so they know their rights.
    We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
    permission to copy, distribute and/or modify the software.
    Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for
    this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they
    have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.
    Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a
    free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have
    made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
    The precise terms and conditions for copying, distribution and modification follow.
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
    0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
    distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a
    ‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work
    containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
    (Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.
    Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
    act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a
    work based on the Program (independent of having been made by running the Program). Whether that is true depends on
    what the Program does.
    1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that
    you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
    40



  • Page 41

    intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the
    Program a copy of this License along with the Program.
    You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
    exchange for a fee.
    2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and
    copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
    conditions:
    a)

    You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
    change.
    b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
    Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
    License.
    c) If the modified program normally reads commands interactively when run, you must cause it, when started
    running for such interactive use in the most ordinary way, to print or display an announcement including an
    appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
    and that users may redistribute the program under these conditions, and telling the user how to view a copy of
    this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
    your work based on the Program is not required to print an announcement.)
    These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
    Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,
    do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as
    part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,
    whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
    it.
    Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent
    is to exercise the right to control the distribution of derivative or collective works based on the Program.
    In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
    Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
    3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under
    the terms of Sections 1 and 2 above provided that you also do one of the following:
    a)

    Accompany it with the complete corresponding machine-readable source code, which must be distributed under
    the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
    b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
    your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
    source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
    software interchange; or,
    c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
    alternative is allowed only for noncommercial distribution and only if you received the program in object code or
    executable form with such an offer, in accord with Subsection b above.)
    The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
    complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus
    the scripts used to control compilation and installation of the executable. However, as a special exception, the source code
    distributed need not include anything that is normally distributed (in either source or binary form) with the major
    components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
    itself accompanies the executable.
    If distribution of executable or object code is made by offering access to copy from a designated place, then offering
    equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
    parties are not compelled to copy the source along with the object code.
    4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
    attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights
    under this License. However, parties who have received copies, or rights, from you under this License will not have their
    licenses terminated so long as such parties remain in full compliance.
    5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
    modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
    41



  • Page 42

    Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of
    this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
    6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
    from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not
    impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
    compliance by third parties to this License.
    7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
    issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of
    this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
    simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
    distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by
    all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License
    would be to refrain entirely from distribution of the Program.
    If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
    intended to apply and the section as a whole is intended to apply in other circumstances.
    It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity
    of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system,
    which is implemented by public license practices. Many people have made generous contributions to the wide range of
    software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to
    decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
    This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
    8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
    the original copyright holder who places the Program under this License may add an explicit geographical distribution
    limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such
    case, this License incorporates the limitation as if written in the body of this License.
    9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
    Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
    concerns.
    Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies
    to it and ‘“any later version’“, you have the option of following the terms and conditions either of that version or of any later
    version published by the Free Software Foundation. If the Program does not specify a version number of this License, you
    may choose any version ever published by the Free Software Foundation.
    10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
    write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the
    Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
    preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
    generally.
    NO WARRANTY
    11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
    PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
    PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
    BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
    ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
    DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
    12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
    OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
    DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
    INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
    OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
    PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

    42






Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax AI-2002W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax AI-2002W in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info