Manual Edilkamin Blade 2 H Up (page 78 of 79) (English)

810903

Zoom out

Zoom in

1/79

13.16.1. Parameters

INSTALLER

To adjust some parameters. The probe parameters are active depending on the chosen setup.

 Pellet level sensor: Enables or disables the possibility for the end customer to view and select the status of the

pellet reserve light

 Airkare mode: To select WHETHER Airkare is active and how big the room is (SMALL, less than 30 m3 or BIG)

or not activate (OFF)

 Reset airkare: To reset the working hours of Airkare

 Number of fans: Enables or disables the possibility for the end customer to operate the fan, if present.

 Room input: To choose which item can be read and adjusted by the customer on the Home display. It depends

on the type of system

 Probe: Room probe, standard in the product

 No input: Enables the display reading of the water temperature in the boiler. It excludes the heat demand from

the probe or thermostat.

 Thermostat: Enables the thermostat, which can be installed instead of the room probe.

 Room2/cyl. input: defines the item to be enabled according to the connected component. It depends on the

type of system:

 No input (default)

 Room probe

 Room thermostat

 Cylinder probe

 Cylinder thermostat

 Room3/cyl/se input: Defines the item to be enabled according to the connected component. It depends on the

type of system:

 No input (default)

 Room probe

 Room thermostat

 Low cyl probe

 Low buff probe

 Input puffer: Defines the item to be enabled according to the connected component. It depends on the type of

system:

 No input (default)

 Probe

 Thermostat

 Hysteresis DHW: Defines the hysteresis

 Buffer hysteresis: Defines the hysteresis

 Hyst. buffer : Defines whether or not the water pressure is displayed, via the kit pressure reader.

 Pump temp. on: Defines the water temperature for starting the primary pump.

 Aux output: Sets the auxiliary output according to system setups:

 Remote alarm (default)

 Aux boiler

 Chrono synch: Synchronises the chrono prog.

 Unpair bluetooth: Enables

 Enable antifreeze: Enables or disables the antifreeze function

 Antifreeze: Sets the temperature for the antifreeze function

 Max pump pwm: Defines the maximum pump speed

 Climatic k curve: Sets the value for the climatic k curve

 Min H2O deliv.C°: Sets the minimum automatic boiler set temperature based on the outside temperature

 Max H2O deliv.C°: Sets the maximum automatic boiler set temperature based on the outside temperature

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Blade 2 H Up in the language / languages: English as an attachment in your email.

The manual is 7.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Blade 2 H Up

Edilkamin Blade 2 H Up Usermanual and installation guide - German - 80 pages

Edilkamin Blade 2 H Up Usermanual and installation guide - French - 80 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edilkamin Blade 2 H Up Manual

Product: