517409
4
Zoom out
Zoom in
Previous page
1/7
Next page
TIMER- each time this button is pressed, the digit in the middle
of the display increments up by 1. The digit in the display
corresponds to the amount of time (in hours) that the unit will
run before shutting itself off. If you do not select a timer
setting, the unit will run continuously
-ION- this button toggles the ionizer on and off. The ionizer
cleans the air that passes through the unit
Unpacking and first using the unit
Carefully open the box(es) and take the unit out. Remove all
packing/plastic bags, etc.
COOLER/HUMIDIFIER- this button turns on or off the
cooling function. When the “COOLER/HUMIDIFIER” light on
the control panel is lit, the unit pumps water from its reservoir
over the fabric water curtain. As air is drawn past this water, the
endothermic effects of evaporation result in cooling
Set the unit upright
Plug the unit in
Open the water port and fill the unit with water. Do not over-fill
the unit.
SWING- this button turns on or off the oscillation function.
When the unit oscillates, the base remains still and the upper
part of the tower turns back and forth, directing airflow around
the room
Close the water port door
Turn the unit on with the ON/OFF button and select your
desired settings
Note: the unit includes two ice boxes. To use them, fill them with water and
freeze them. Then put them into the unit’s water reservoir. You may use them
one at a time or concurrently.
SPEED- this button adjust the speed. There are three speed
settings for airflow. Note that when the unit is initially turned
on, it starts on medium speed and changes to low speed
automatically
Draining the unit
MODE- this button toggles the airflow functions. There are
three functions:
If you ever need to drain the unit, first make sure the unit is in
an appropriate place for drainage
o Normal/manual- this mode, represented by three
horizontal wavy lines, allows you to manually set the
airflow speed
Remove the drain plug from the rear of the unit
Allow the water to drain out
Reinstall the drain plug
o Natural/variable- this mode, represented by a
mountain, automatically shifts the airflow speeds
between the three settings
Cleaning
Pre-filter- depending on the environment, the pre-filter may
require cleaning every two weeks to every two months or more.
The easiest way to clean the pre-filter is to vacuum it with a
brush attachment.
o Sleep- this mode, represented by “ZZZ”, operates like
the Normal/manual mode, but the airflow speed
gradually decreases over a period of 1-2 hours, and the
unit eventually turns itself off. The higher the initial
airflow setting, the longer the unit runs before shutting
off, and the greater the different airflow speeds the unit
cycles through prior to shutting off
If the pre-filter is exceptionally dirty, you may remove it from
the unit (unplug the unit first) and wash it in a mild soap and
water solution. Rinse it thoroughly and allow it to dry
completely before reinstalling.
-5- -6-
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edgestar EAC210TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edgestar EAC210TS in the language / languages: German as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info