Manual Economy hdm 1015 ebf 850k (page 5 of 22) (English, German, Dutch, Danish, French, Italian, Norwegian)

388952

Zoom out

Zoom in

1/22

Ferm 05

40 Ferm

• Whenever any of the problems mentioned

above appear, immediately cease using the

machine and have it repaired by an expert.

Electrical safety

Always check that the mains voltage is

the same as on the type plate of the

machine.

The machine is double insulated; there-

fore, no earth connection is required.

Replacement of power cords or plugs

Immediately dispose of old cords and plugs once

they have been replaced. It is dangerous to plug

a loose power cord into a mains power socket.

Use of extension leads

Only ever use approved extension leads that are

suitable for the power rating of the machine.

The

minimum core thickness is 1.5 mm

. Whenever

using a reel extension lead, always fully unroll

the lead.

3. OPERATING

Hammer drills require very little operator

pressure. Excessive pressure on the tool

can lead to unnecessary overheating of

the motor, and burning of the driven tool.

Auxiliary handgrip

The auxiliary handgrip can be rotated 360º

around the drill head, enabling safe and comforta-

ble operation, for both left and right-handed users.

• Loosen the handgrip by turning it anticlockwise.

• Rotate the handgrip to the desire position.

• Retighten the handgrip in the new position.

Exchanging and removing drill bits

Fig. A + B

Before exchanging bits, first remove the

power plug from the wall socket.

Inspect bits regularly during use. Blunt

bits should be re-sharpened or repla-

ced.

• Lightly lubricate the shaft of the drill bit before

inserting into the machine.

•

Place the shaft of the drill bit into the opening of

the drill chuck and twist until latched.

• To release and remove the drill bit pull back the

collar of drill chuck .

Setting depth gauge

• Loosen the handgrip by turning it anticlockwise.

•

Insert the depth gauge ruler through the hole in

the auxiliary handgrip.

• Slide the ruler to the desired depth.

• Retighten the screw firmly.

Function selection switch

Fig. D

The correct position of the selection switch for

each machine function is given in the diagram on

page 3.

1 = Demolition hammer/chisel

2 = Rotary hammer drill

3 = Drilling

Switching On/Off

• To start the drill, squeeze the trigger.

• To stop the drill, release the trigger

Installing dust catcher

Fig.C

The dust catcher prevents large amounts of dril-

ling dust entering the machine when drilling into

ceilings.

• Remove the drill bit.

•

Slide the dust catcher over the shaft of the drill

bit.

• Place the drill bit with catcher in the drill chuck.

• Always replace a damaged dust catcher imme-

diately.

4. MAINTENANCE

Take care that the machine is not con-

nected to power whenever maintenance

work on the mechanical parts is taking

place.

The machines are designed to function problem-

free for a long period with a minimum of mainte-

nance.

Through regular cleaning and correct tre-

atment, you help assure a long working life for

your machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Economy hdm 1015 ebf 850k in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Economy hdm 1015 ebf 850k Manual

Product: