Manual Econo-Heat Ecare Mattress Pad (page 4 of 8) (English, French, Spanish)

527469

Zoom out

Zoom in

1/8

ENGLISH

FITTING YOUR HEATED MATTRESS PAD

1 Make sure that the ECONO-HEAT eCare heated mattress pad is the correct size for your mattress. Do not use an over sized electric

mattress pad and tuck it in.

2 Place the electric mattress pad directly on the mattress with the label at the top end of the bed facing upward.

3 Starting at the foot end of the bed t the electric mattress pad to the mattress with the elastic bands provided. Then secure the top

end. At the top end there might be a small overlap of the electric mattress pad, depending on the length of the mattress. The exible

elastic bands will ensure that the electric mattress pad ts all mattresses. Ensure that electric mattress pad is at on the mattress

with no folds or creases.

4 Carefully t the bottom sheet over the electric mattress pad, ensuring that the electric mattress pad remains at.

OPERATING YOUR MATTRESS PAD

1 Ensure that the exible lead from the control switch is rmly plugged into the socket of the electric mattress pad.

2 Plug the AC/DC adaptor (Part No. ZBHWX-A2100276-A ) into the wall socket and switch ON. A green LED light on the adaptor will

indicate that the adaptor is working.

3 Move the slider switch on the controller to the desired heat setting recommended for continuous use: Position I – Low (±75°F)

or Position II – Medium (±85°F). The red LED light will indicate that the mattress pad is ON. Position III (Boost, ±95°F) is not

recommended for continuous use.

PUSHBUTTON boost settings (see pictorial diagram below):

a) SINGLE TAP BOOST MODE (20 minute preheat timer): to preheat the electric mattress pad, set the control slide switch to the

desired setting recommended for continuous use – Position I or II and press the

PUSHBUTTON ONCE. The green LED light

will indicate that the electric mattress pad is in boost mode. After 20 minutes the green LED light will turn OFF and the control

switch will automatically revert to the pre selected heat setting.

b) DOUBLE TAP BOOST MODE (1 hour auto OFF timer): To activate the 20 minute boost and 1 hour auto OFF timer, preset

the control slide switch to the desired setting recommended for continuous use – Position I or Position II and press the

PUSHBUTTON TWICE. The ashing green LED light will ash indicating that the electric mattress pad will preheat (boost)

for 20 minutes and then automatically switch to the pre selected heat setting. The electric mattress pad will remain ON for a

further 40 minutes and then automatically switch OFF. To switch the electric mattress pad ON again move the control slide

switch to position O - OFF and back to the desired heat setting recommended for continuous use:

Position I – Low or Position II – Medium.

5 AUTOMATIC ENERGY SAVER 10 HOUR SWITCH OFF: The control switch is designed to automatically switch OFF after 10 hours

of continuous use. If the electric mattress pad is still required move the control slide switch to position O – OFF and back to the

desired heat setting recommended for continuous use: Position I – Low or Position II – Medium.

6 Unplug the AC/DC adaptor from the wall socket when not in use.

FEATURES

1. Safety Extra Low Voltage (SELV Class III)

– The Ultimate in Health and Safety

2. Extra safe and shockproof

3. Eliminates harmful electromagnetic radiation associated

with other electric mattress pads

4. Machine washable and dryable

5. Soft, luxurious and comfortable

6. Outer covering made from 100% cotton

7. Three heat settings – low, medium and high with two

convenient OFF positions

8. Convenient boost timer heats up your bed faster, for those

extra cold nights

9. Low setting is extra low which provides a desirable setting

for comfortable all-night sleep

10. Energy saving – Turns off automatically after 10 hours if left

on accidentally

11. Energy saving – Only uses a maximum of 60W on high

setting

12. Convenient user-selectable one hour timer – automatically

switches off after falling asleep

13. The mattress pad creates a comfortable warm feeling, which

is close to the body’s natural temperature

14. Available in Single, Double, Queen and King size

15. Easy to fit – adaptable elastic straps fit all mattress heights

and lengths

16. International safety standards approved

17. Two year warranty

HEALTH AND SAFETY

The ECONO-HEAT eCare heated mattress pad uses only 21 V DC and emits minimal electromagnetic waves, making it a safe and

healthier choice compared to other electric mattress pads.The mattress pad is machine washable and is made of 100% cotton exterior

so that you can sleep undisturbed all night long.

WASHING INSTRUCTIONS

Important, before washing detach hand controller(s) from the electric mattress pad and

secure connector aps to mattress pad using snap fasterners. HAND WASHING: Soak for 15

minutes in lukewarm water and mild soap. DO NOT scrub. Rinse well. MACHINE WASH: Place

mattress pad in washing machine. Wash using gentle cycle (85°F). Spin Dry. DRYING: Tumble

dry for 10 minutes on low setting. Then drape over washing line until completely dry.

DO NOT wet the electric control switch.

DO NOT dry clean.

DO NOT wash the mattress pad if any wires have worn through the fabric.

DO NOT use bleach.

DO NOT iron.

DO NOT reconnect the mattress pad until it is completely dry.

DO NOT wring.

*The double mattress pad

(137 x 200cm) is available with single

or dual controllers.

A B C D

Wall Plug Power Supply

GREEN LED

RED LED

OFF

HIGH

MEDIUM

LOW

PUSH BUTTON

Press once = Boost

(20min preheat timer)

Press twice = Boost

(1hr auto OFF timer)

RED SLIDER

(heat selection)

Control Switch Removable Controller

DOUBLE*, QUEEN & KING SIZE BEDS SINGLE & DOUBLE* SIZE BEDS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Econo-Heat Ecare Mattress Pad in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Econo-Heat Ecare Mattress Pad Manual

Product: