654280
24
Zoom out
Zoom in
Previous page
1/25
Next page
ENGLISH
Bedienungsanleitung/ User manual V-Titan 64 23
Loosen the screws of the grinder dial with an Allen
wrench (2.5mm).
Remove the grinder dial.
Unscrew the bracket of the upper burr. Please note that
it may take some force to do so.
Clean the burrs and the threads with a brush. You may
use a vacuum cleaner as well.
Make sure that everything is clean when re-assembling
the parts. There should be no coffee grounds remaining
on the threads. Otherwise you will not be able to put
the parts back together again correctly.
Re-assemble the grinder and re-adjust the grinding
level.
7 TIPPS AND TROUBLESHOOTING
Should a bean become stuck in the grinding mechanism, you may easily fix this yourself.
1 Adjust the grind to a coarser degree. Turn the grind adjuster counter-clockwise by two full turns.
2 Press the portafilter against the grinding button and grind coffee. The stuck beans should now come loose.
3 Re-adjust the grind.
In case the grind setting of your grinder changes autonomously after many grinding procedures, it is most likely that
vibrations during grinding have caused the bracket of the grind level adjuster to become loose. Please proceed as
follows to correct the problem:
1 Switch the grinder off and unplug the electrical cord.
2 Loosen both screws (2.5mm Allen wrench), that are, or were, holding the grind adjustment bracket.
3 Position the bracket as close to the gear wheel as possible and tighten both screws again.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm V-Titan 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm V-Titan 64 in the language / languages: English, German as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info