654274

Ecm Controvento Due Manual

29
Zoom out
Zoom in
Previous page
1/29
Next page
28
Recommendations for proper milk foaming
• If possible, use cold and fresh milk with a fat content of approx. 1.5 % or 3 %. Even homogenised milk is suitable
– if you prefer.
• Use a frothing container (made of metal) with a minimum volume of 0.5 litres. The size of the container should
not be too wide. A small and narrow container is perfect.
• Open the steam lever for approx. 5 seconds to release the condensation water and to create dry steam.
• Fill 1/3 of the frothing container with milk and place it under the steam nozzle. The nozzle should be immersed
in the middle of the frothing container, just below the surface.
• Activate the steam lever. The steam pervades the milk.
• Keep the frothing container still.
• You will notice a light suction in the milk jug after a few seconds. Proper frothing begins. Move the frothing
container downwards while the milk level increases. The steam nozzle must be kept under the surface of the
frothed milk.
• Attention: When the desired amount of milk froth is reached, immerse the entire steam nozzle in the frothing
container for a short time and close the steam lever.
Milk proteins “froth” with a temperature up to 77°C.
Once this temperature is exceeded, the milk does not froth any further.
• If there is some milk left in the milk jug, let it cool down; it can be re-used later.
• Advice: When milk frothing is finished, just shake the frothing container a little bit in order to make the larger
milk bubbles ascend to the surface and to get a more compact milk froth.
• After frothing the milk, release steam into the drip tray to avoid blockage of the steam nozzle.
12 RECOMMENDED ACCESSORIES
• Blind filter for brew group cleaning (included with delivery)
• Detergent for brew group cleaning with blind filter (available at your specialised dealer, item no. PAV9001034 or
89450).
• Stainless-steel tamper
• Tamping station
• Gran Crema porta filter
• An assortment of steam nozzles
S-Automatik 64 Knock-box Tamper station Steam nozzle assortment
… 29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ecm Controvento Due at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ecm Controvento Due in the language / languages: English, German as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info