-
12
-
English English English English English English English
Remove the pocket and any other accessories from the
centre cluster to make room for the main unit.
1
Remove the mounting brackets for the pocket.
2
Mounting bolts
Pocket, etc
Centre cluster panel
Attach the brackets to the main unit.
3
Install the main unit in the vehicle.
4
Main unit
Mounting bracket
1
••
Be careful not to forcefully push on the main unit's
display or buttons during installation. This may result in
damage to the main unit.
••
This installation method is only one example. When
installing the main unit to the vehicle, be sure to as the
place of purchase for information on what installation
method to use.
Tip
6
5
4
Install the bezel on the main unit.
Fasten the rear of the main unit.
Insert the main unit into the mounting sleeve until it
locks in place.
- Main unit installation example (If installing the main unit using the side brackets of the vehicle) -
Bezel
6
Mounting sleeve
7
Metal of vehicle
Dashboard or console box
Be sure to use the supplied accessory mounting screws
(M4 x 5) as the mounting screws. If any other screws
are used, they may damage the inside of the unit.
Tip
example 2
By adjusting the positions of the brackets, the main unit's
installed depth can be adjusted.
example 1
Front of vehicleFront of vehicle
Pocket
Thin flat
screws
(M4 x 5) x 4
12
Screws x 2
Screw position
Screw position
If using these installation holes, be sure to use
the Pan screw with washer (Blue:M4 x 3).
Main unit
1
Main unit
1
13
••
Carefully bind any excess length of cord that is
connected to the main unit and secure it to an area of
empty space in the vehicle so that it does not move
around or get caught in the main unit or vehicle-side
equipment. If the cords are not handled correctly,
operating problems or short-circuits may occur, and this
may result in the danger of fire or other accidents.
••
Connect all cables before installing the main unit.
Tip
••
Be careful not to forcefully push on the main unit's
display or buttons during installation. This may result in
damage to the main unit.
••
This installation method is only one example. When
installing the main unit to the vehicle, be sure to as the
place of purchase for information on what installation
method to use.
Tip
