Manual Echostar pvr 5020 (page 3 of 64) (English)

424406

Zoom out

Zoom in

1/64

Safety Guidelines

www.echostar-int.com Page III

SAFETY GUIDELINES

1. INTENDED USE

This documentation set is intended for anyone

who uses an EchoStar receiver. It can be used

by both first-time and experienced users of

receivers who want to install, use and maintain

their receiver.

This User guide is applicable for the

EchoLITE PVR receivers and is divided into

separate sections and chapters. For easy

access to the information, a clear table of

content is provided.

Note that this manual is applicable for all

models, therefore the most comprehensive

description and operation is given. For detailed

information, please refer to your dealer.

2. NOTATIONAL CONVENTIONS

Throughout this user guide, there may be

blocks of text indicated by symbols and printed

in a different way then the surrounding text.

These blocks of text ask the attention of the

reader to avoid hazardous situations. The

hazard levels are indicated as:

THIS WARNING INDICATES A HAZARDOUS

SITUATION WHICH, IF NOT AVOIDED, COULD

RESULT IN (SERIOUS) INJURY.

This caution indicates a situation which, if

not avoided, could damage the equipment

or other properties.

This note indicates additional information to

make you aware of possible problems and

information of any importance to help the

you to understand, to use and to maintain

the installation.

3. GENERAL SAFETY

Read this user guide carefully and make sure you understand the instructions given. For your

safety, know what the reaction upon each action will be. Do not perform any actions which are not

described in this user guide, failing to do so might result in an uncontrolled behavior of the receiver

or even in a hazardous situation for persons and/or equipment.

Disconnect the receiver from the mains before you start any maintenance or installation

procedures. Do not use alcohol or ammonia based liquids to clean the receiver. If required, clean

with a soft lint-free cloth slightly made damp with a mild soap solution.

Consult an authorized service technician if the receiver does not operate normally when the

instructions in this user guide are strictly followed. Do not to attempt to open the receiver, as you

will be exposed to a shock hazard.

To avoid the risk of electrical shock and fire, do not put any objects on top of the receiver which:

■ contain liquids, such as vases, glasses, bottles, etc.;

■ contain an open heat source or open fire, such as candles, cigarettes, ash trays, etc.;

■ could fall through the ventilation slots or which could cover them and prevent proper cooling of

the components inside.

Make sure that nothing rests on the receivers cables and that the cables are not located where they

can cause injury to persons and pets (e.g to stumble over, eat the cable).

Do not install the receiver:

■ in the open air;

■ in a closed or poorly ventilated cabinet;

■ directly on top of or under another equipment;

■ on a surface which will obstruct the ventilation slots.

Do not expose the receiver and it’s accessories:

■ to rain or excessive moisture to avoid the risk of shock or permanent damage to your receiver;

■ to direct sunlight, heaters, stoves or any other heat generating equipment;

■ to any magnetic objects, such as speakers, electric motors, transformers, etc.;

■ to excessive vibration.

To help avoid possible damage to the receiver’s electronics, wait 5 seconds after you switched off

the receiver before you move the receiver or disconnect any equipment.

For receivers with conditional access capabilities:

■ do not put any foreign objects into the Common Interface (CI) slots or smartcard reader;

■ do not touch the components or pins on the CI-module/smartcard;

■ hold the CI-module and the smartcard by its edges.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Echostar pvr 5020 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Echostar pvr 5020 Manual

Product: