701125
35
Zoom out
Zoom in
Previous page
1/116
Next page
EN
2.1 Other possible displays
Lb Battery almost empty.
E2 Electric fan or blower – fault.
E3 Compressor – fault.
E5 Overheating of compressor electronic
module.
E6 Frost protection sensor – incorrect contact
or defect.
E9 Compressor protection – cab overturned.
E0 Temperature sensor, return air – faulty con-
tact or defective.
EC Communication cable – fault.
Note
If E2 / E3 / E5 / E6 / E0 / E0 or EC is displayed, go
to an authorised Eberspächer workshop.
2.2 Switching on
Press the ON / OFF button of the control unit.
The air-conditioning system always starts in
Function F4 (automatic operation).
Note
When starting up for the first time the air-condi-
tioning system starts with the parameters set in
the factory.
2.2.1 Select function F0 to F6
To select press the ON / OFF
button until the
required function (F0 – F6) appears in the
display.
F0 Manual operation
F1 Display of the temperature in the driver's
cab
F2 Programming the operating period
F4 Automatic operation
F6 Display °C or °F
Note
Functions F3 and F5 are not assigned.
2.2.2 Function F0 – manual operation
F0 appears in the display.
Setting the temperature and blower speed at
the control unit
Set a temperature value between 15 ºC and
27 ºC or 59 ºF and 71 ºF by briefly pressing the
or button. The set temperature value
appears in the display.
Set a blower speed V1, V2, V3, V4 or V5 by keep-
ing the
or button pressed. During the set-
ting the blower level is shown in the display.
2.2.3 Function F1 – query the temperature
in the driver's cab
F1 appears in the display, the current tempera-
ture in the driver's cab is then displayed.
2.2.4 Function F2 – program the operating
period
F2 appears in the display. The operating period
can be set for a period of 1 to 9 hours by press-
ing the
or button briefly. Press the
ON / OFF
button to confirm the set operating
period.
2.2.5 Function F4 – automatic operation
F4 appears in the display. With this function the
air-conditioning system controls the tempera-
ture automatically by adjusting the blower
speed.
Setting the temperature at the control unit
Set a temperature value between 15 ºC and
Operating Instructions | Cooltronic G2 / G2.5 Hatch
81.0000.95.2783 | EN | 10.2019 35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eberspacher Cooltronic 1400 G2 Hatch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eberspacher Cooltronic 1400 G2 Hatch in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Finnish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info