701129
2
Zoom out
Zoom in
Previous page
1/2
Next page
Eberspächer Climate Control Systems GmbH & Co. KG | Eberspächerstraße 24 | 73730 Esslingen
info@eberspaecher.com | www.eberspaecher.com
Setting heating mode preselection at the mini controller:
Press the
button to select heating mode – the preselection
is saved. You can set the setpoint temperature default with the
temperature preselection controller. To confirm, the red LED lights up
for approx. 3 sec, but the heater is not started.
Setting ventilation mode preselection at the mini controller:
Press the
button to select ventilation mode – the preselection is
saved. The temperature preselection controller has no function in
ventilation mode. To confirm, the blue LED lights up for approx. 3 sec,
but the heater is not started.
B) Heater is switched on (mini timer is active)
The ON / OFF button on the mini timer is used to switch the heater
on in the saved mode (heating / ventilation - as preselected using
the mini controller) mode). If the heater is in heating mode the red
LED lights up; in ventilation mode the blue LED lights up as a check
signal.
Using the mini controller to switch between heating and
ventilation modes:
Press the
button to switch to heating mode. You can set the
setpoint temperature default with the temperature preselection
controller. If the heater is in heating mode the red LED lights up as a
check signal.
The preselection of the mode is updated.
Press the
button to switch to ventilation mode. The temperature
preselection controller has no function in ventilation mode. If the
heater is in ventilation mode the blue LED lights up as a check signal.
The preselection of the mode is updated.
Heating mode is ended with an after-run.
Using the mini controller to change the setpoint temperature
default:
The temperature preselection controller can be used to set the
temperature default at any time during heating mode.
Emergency operation – error when preselecting the operating
mode:
Unable to save the mode preselection.
The red LED flashes for approx. 10 sec. The mini controller then
switches to emergency mode (operating mode preselection: heating).
The heater remains switched off. Emergency mode can be reset by
renewed preselection or by a voltage reset (remove the fuse).
If the heater is switched on by the mini timer in emergency mode, the
red LED lights up and flashes. The heater is in heating mode with set
setpoint temperature default.
It is not possible to change modes in emergency operation.
The heater can only be switched off via the mini timer.
Service
Technical Support
If you have any technical questions or problems with the heater, the
control unit or the operating software, please contact the following
service address:
support-UK@eberspaecher.com
22 1000 90 96 70 EN 12.2016 Subject to change without notice © Eberspächer Climate Control Systems GmbH & Co. KG
EN | Operating Instructions | Airtronic Mini-Controller
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eberspacher Airtronic Mini-Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eberspacher Airtronic Mini-Controller in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eberspacher Airtronic Mini-Controller

Eberspacher Airtronic Mini-Controller User Manual - German - 2 pages

Eberspacher Airtronic Mini-Controller User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info