Manual EBERLE INSTAT 868-r1 (page 2 of 2) (English)

446409

Zoom out

Zoom in

1/2

Additional notes:

1. On the transmitter, activate the Learn Mode:

468931003260

INSTAT 868… Quick Start – Creating the radio link

Note: without correctly established radio link the receiver will work in Alarm mode, the room will be heated constantly to 30%.

For INSTAT 868-r/rd (with display)

Details see manual item 6.17

Note:

This transmitter cannot be used

in combination with receivers

0525 98… or 507 1901/2…

(with 433 MHz)

With button Y, move cursor to l

Press and hold down button b and additionally press

button Y briefly.

The display reads 0x:xx (x = any figure)

Change first digit to (1)x:xx

Press b

Symbol zcan be read bottom right (Learn-Mode is active now)

For INSTAT 868-r1 (without display)

Details see manual item 5

Note:

This transmitter cannot be used

in combination with receivers

0525 98… or 507 1901/2…

(with 433 MHz)

Press and hold down button ï (bottom) and additionally

press button RESET (top) briefly.

The red lamp will switch on (Learn Mode is active now)

Note for electric heating (the valve protection should be switched off

For INSTAT 868-r/rd (with display)

Details see manual item 6.8

With button Y, move cursor to k

Press and hold down button b and additionally press

button Y briefly.

The display reads xx:x(1) (x = any figure)

Change fourth digit to xx:x(0) (= valve protection off)

Press b

For INSTAT 868-r1 (without display)

Details see manual item 3.7

Open jumper BR1

4. Testing the radio link:

Adjust temperature to 30/40°, after ~30 sec the red lamp at the receiver will switch on

Adjust temperature to 5 °, after ~30 sec the red lamp at the receiver will switch off

For controllers without radio clock (INSTAT 868-r)

Clock and day of the week should also be adjusted, see manual item 2.5 (short description).

If necessary modify events and temperatures, see in manual table I, II and controller features table III.

For receivers INSTAT 868-a8U

If necessary: adjust clock see manual "Description of the Clock"

modify program see manual "Adjust events for the Rooms"

2. On receiver, activating the Learn Mode:

For INSTAT 868-a4 and -a6

Details see manual item 5

Note:

This receiver cannot be used

in combination with transmit-

ters 0525 98… or 517 1901…

(with 433 MHz)

For the channel to be learned, press the

related button.

E.g. for channel 1 press the button close to it briefly.

The red lamp will switch on and a tone can be heard

If the lamp at the receiver is switched off and the tone

stops, the radio link is established (after ~30 sec)

For INSTAT 868-a1 and -a1S

Details see manual items 5 or item 4 for the plug in receiver

Note:

This receiver cannot be used

in combination with transmitters

0525 98… or 517 1901… (with 433

MHz)

Press button z briefly.

The red lamp will switch on and a tone can be heard

If the lamp at the receiver is switched off and the tone

stops, the radio link is established (after ~30 sec)

3. Cancelling Learn Mode on the Transmitter:

For INSTAT 868-r/rd (with display)

Press b briefly (Learn Mode is deactivated now)

Move cursor to k via Y, for working with the

weekly program

For INSTAT 868-r1 (without display)

Press button RESET briefly (upper side) Learn Mode is

deactivated now)

╞

For INSTAT 868-a8U

Details see manual item 4.1

Note

This receiver cannot be used in combination with transmitters 0525 98... or 517 1901 … (with 433 MHz)

Press Y until “L” is visible. The already teached channels are visible on the lamps and in the display.

a , Z

until the lamp for the requested room is blinking.

to start learning mode. The display counts up.

If the transmitter is recognised, the corresponding lamp lights constantly and in the display

there will be a chevron on this room.

Additional notes:

1. On the transmitter, activate the Learn Mode:

468 931 003260

INSTAT 868… Quick Start – Creating the radio link

Note: without correctly established radio link the receiver will work in Alarm mode, the room will be heated constantly to 30%.

For INSTAT 868-r/rd (with display)

Details see manual item 6.17

Note:

This transmitter cannot be used

in combination with receivers

0525 98… or 507 1901/2…

(with 433 MHz)

With button Y, move cursor to l

Press and hold down button b and additionally press

button Y briefly.

The display reads 0x:xx (x = any figure)

Change first digit to (1)x:xx

Press b

Symbol zcan be read bottom right (Learn-Mode is active now)

For INSTAT 868-r1 (without display)

Details see manual item 5

Note:

This transmitter cannot be used

in combination with receivers

0525 98… or 507 1901/2…

(with 433 MHz)

Press and hold down button ï (bottom) and additionally

press button RESET (top) briefly.

The red lamp will switch on (Learn Mode is active now)

Note for electric heating (the valve protection should be switched off

For INSTAT 868-r/rd (with display)

Details see manual item 6.8

With button Y, move cursor to k

Press and hold down button b and additionally press

button Y briefly.

The display reads xx:x(1) (x = any figure)

Change fourth digit to xx:x(0) (= valve protection off)

Press b

For INSTAT 868-r1 (without display)

Details see manual item 3.7

Open jumper BR1

4. Testing the radio link:

Adjust temperature to 30/40°, after ~30 sec the red lamp at the receiver will switch on

Adjust temperature to 5 °, after ~30 sec the red lamp at the receiver will switch off

For controllers without radio clock (INSTAT 868-r)

Clock and day of the week should also be adjusted, see manual item 2.5 (short description).

If necessary modify events and temperatures, see in manual table I, II and controller features table III.

For receivers INSTAT 868-a8U

If necessary: adjust clock see manual "Description of the Clock"

modify program see manual "Adjust events for the Rooms"

2. On receiver, activating the Learn Mode:

For INSTAT 868-a4 and -a6

Details see manual item 5

Note:

This receiver cannot be used

in combination with transmit-

ters 0525 98… or 517 1901…

(with 433 MHz)

For the channel to be learned, press the

related button.

E.g. for channel 1 press the button close to it briefly.

The red lamp will switch on and a tone can be heard

If the lamp at the receiver is switched off and the tone

stops, the radio link is established (after ~30 sec)

For INSTAT 868-a1 and -a1S

Details see manual items 5 or item 4 for the plug in receiver

Note:

This receiver cannot be used

in combination with transmitters

0525 98… or 517 1901… (with 433

MHz)

Press button z briefly.

The red lamp will switch on and a tone can be heard

If the lamp at the receiver is switched off and the tone

stops, the radio link is established (after ~30 sec)

3. Cancelling Learn Mode on the Transmitter:

For INSTAT 868-r/rd (with display)

Press b briefly (Learn Mode is deactivated now)

Move cursor to k via Y, for working with the

weekly program

For INSTAT 868-r1 (without display)

Press button RESET briefly (upper side) Learn Mode is

deactivated now)

╞

For INSTAT 868-a8U

Details see manual item 4.1

Note

This receiver cannot be used in combination with transmitters 0525 98... or 517 1901 … (with 433 MHz)

Press Y until “L” is visible. The already teached channels are visible on the lamps and in the display.

a , Z

until the lamp for the requested room is blinking.

to start learning mode. The display counts up.

If the transmitter is recognised, the corresponding lamp lights constantly and in the display

there will be a chevron on this room.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EBERLE INSTAT 868-r1 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EBERLE INSTAT 868-r1

EBERLE INSTAT 868-r1 User Manual - German - 2 pages

EBERLE INSTAT 868-r1 User Manual - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EBERLE INSTAT 868-r1 Manual

Product: