EN
EN-22
WARNING: Check that the carrycot body or seat unit attachment devices are correctly
engaged before use.
WARNING: Use a harness as soon as your child can sit unaided.
WARNING: This product is only suitable for a child that cannot sit up unaided.
WARNING: The EasyWalker carrycot is intended to be used for children from birth to the
age of 6 months or 9 kg.
WARNING: Do not use the carrycot if any part is broken, torn or missing.
WARNING: Only use the EasyWalker carrycot or accessories approved for use by
EasyWalker on the EasyWalker stroller.
WARNING: Only use replacement parts and accessories approved by EasyWalker BV.
WARNING: Ensure that the parking brake is engaged when the EasyWalker stroller is
stationary.
WARNING: When assembling the EasyWalker carrycot there should not be a child in the
seat or carrycot.
WARNING: Check regularly for signs of damage and wear of the handles and clips at the
bottom of the carrycot.
WARNING: Only use the EasyWalker carrycot on a firm, horizontal level and dry surface.
Contents of the box
The following items must be contained in the EasyWalker carrycot box:
• 1 carrycot with sun canopy and cover.
• 1 mattress with fleece and cotton cover.
• 1 rain cover.
• 1 mosquito net.
• 1 sheet cover.
• 1 instruction leaflet.
You will also need the connection tube you received in the box of the EasyWalker stroller.
Assembling the EasyWalker carrycot
The EasyWalker carrycot is simple to assemble. Before using for the first time, take the
carrycot out of the box, take the cover off the carrycot and remove the accessories, the
mattress and the inside covers. Pull the fastener on the bar (nearest to the head-end) in
the direction of the head-end until it clicks, left and right, into the metal holder (image 19).
Pull the fastener on the bar (nearest to the foot-end) in the direction of the foot-end until
it clicks, left and right, into the metal holder (image 19). Attach the inside covers to the
carrycot again with Velcro. Put the mattress back in the carrycot (image 20). You can now
choose whether you want the fleece or cotton side uppermost. Turn the sun canopy
upwards by pushing the black buttons on both sides of the sun canopy and simultaneously
turning the canopy upwards (image 21). Ensure that the canopy cannot turn any further
and release the buttons (image 21). Reattach the cover over the carrycot and choos the
position of the wind screen (image 22).
Using the EasyWalker carrycot
Attaching carrycot to the frame
Engage the parking brake of the stroller (image 24). Remove the seat, the sun canopy and
the bumper bar from the frame. Place the connection tube (In box of stroller) with open
clips, on the inside against the frame. Position between the two caps and shut the left and
right clips until they click (image 25). Lift up the carrycot using the grips in
the sun canopy and under the foot-end.
!
!
!
!
!
!
!
!
!
!
!
