100977

Easypix S 318 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
5.2 Inserting a memory card (not included)
This camera has built-in internal memory. This memory can be extended with a SD memory card
(not included).
Follow the instructions given below to insert the optional SD memory card into the camera.
1. Turn off the camera first.
2. Insert the SD card into the slot.
Note: There is only one way to insert the SD memory card into the slot. Do not force the card into
the slot. This may damage both the camera and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See the following
sections for more information.
5.3 Formatting the memory
If you use a SD card, it must first be formatted before you can take photographs. Follow the
instructions given below to do this.
1. Press Menu button
2. Select Setup setting by right key.
3. Press shutter to confirm and select by up or down key.
4. Press shutter to format the card or memory.
5.4 Setting the resolution
The camera can be set to different resolutions.
1. Press MENU to set proper resolution.
Resolution: VGA（640 x 480），1.3M（1280 x 960） 3.1M (2048 x 1536),
5M (2560 x 1920), 8M (3264 x 2448), 12M (4032 x 3024)
2. Six different resolutions will be displayed. Select the desired resolution by using the ▲
or
▼buttons and then press the shutter button to confirm the selection.
5.5 Taking photographs
1. Turn on the camera by pressing the ON/OFF button.
2. Press MODE to set the camera to photo mode (
).
3. Depending on the distance to the object being photographed, use Macro switch to
adjust the distance. Select the flower symbol (
) if you wish to take a close-up
photograph (11cm –18cm).
If you wish to take photograph of surroundings or people (0.5m - infinity), set the Macro
switch to Normal mode (
).
4. If you are not sure if there is enough lighting, turn the automatic flash (
) on by pressing
the flash button. (If the battery power is too low, the flash won’t be activated).
5. Use the LCD screen to aim the object you wish to photograph.
6. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display turn
on again.
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 8 times.
1. Zoom in by pressing the ▲ or
▼ button, a number will appear on the display. 8.0 is the
maximum zoom.
2. You can zoom in by pressing the UP or DOWN button.
5.7 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph for yourself or when you
wish to photograph for an object where the camera must be as still as possible, for example on
the stand.
1. Set the camera to photo mode.
2. Press the MENU button. The quick menu will appear.
3. Press
▼ to self-timer mode, press shutter and ▲or ▼ to set the delay time: 2seconds / 10
seconds / 10+2seconds or off.
4. Press the shutter button to confirm. The self-timer function is now ready for use.
5. Aim at the object you wish to photograph.
6. Press the SHUTTER button to take a photograph.
7. The self-timer indicator LED in the front will blink.
8. The photograph will be taken after the timer reaches the delay time that you pre-set, and
the camera will beep once.
5.8 Recording video clips
1. Press the MODE button to select.
2. Press the SHUTTER button to start recording video, press the SHUTTER button again to
stop recording. The video clip will now be saved as an AVI file in the camera memory.
3. Press MENU to set proper resolution, EV and WB, and press OK to confirm.
5.9 Recording voice
1. Press MODE button to select the voice recording mode,
2. Press SHUTTER to start voice recording and press it again to stop.
5.10 Playback photographs
1. Press MODE button, press or to select the video photo.
2. Press ▲,photo will zoom in; press
▼,photo will zoom out
3. Press ▲,
▼, or to shift the image.
4. Press MENU to select SLIDE SHOW, and then press shutter to confirm. The pictures
saved in your camera or your SD card will be displayed in sequence automatically.
5.11 Playback video clips
1. When video clips are displayed, press ▲ to play, and press ▼ key to stop.
2. Press ▲ to pause the playback
3. Press MODE key to exit.
5.12 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or delete all the photographs / video
clips in the memory.
5.12.1 Delete photograph
Follow the instructions given below to delete photograph.
1. Press MODE key to enter the playback mode.
2. Press the MENU button and select Delete One/Delete All, press OK to confirm.
3. If you select Protect picture, your current file or images can not be deleted.
4. Press MENU to exit.
NOTE: Select ‘Deleting All’ and Press OK to confirm, all the pictures will be deleted.
6. Installing the camera driver
The driver in the CD has to be installed, under following applications:
For Windows 2000, Windows XP and Windows Vista: For using as a PC cam only. (Download
picture /video is driver free)
6.1 Uninstalling old drivers and devices
There is a chance for a conflict between the new driver and an existing driver in the computer. In
that case, it is better to remove those drivers before installing the new driver.
1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe Mode’
from the menu which will be displayed).
2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’
icon.
3. Find all the programs for similar, old devices and remove these by clicking on the
‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear
twice. In that case, remove all the programs which appear twice.
4. Restart the computer.
6.2 Installing the driver for Windows 2000 /Windows XP /
Windows Vista
Note: Make sure all other programs are closed during the installation process.
Note: During installation for Windows XP/Vista, you may receive a message saying that the driver
has not been signed. This does not cause a problem for the functionality of the program.
Please click "Yes" to continue.
Note: For example, ‘D: \’ is used to indicate the CD-ROM drive. This may be different for your
computer.
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will start
automatically. If it does not start automatically, please do the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2. The Software Installer will appear.
3. Select the language you wish to use for the installation.
4. Click on ‘Install driver’ to start the installation of the camera driver.
5. Follow the on-screen instructions.
6.3 Connecting the camera
The camera can be connected to the computer in two different modes: Mass Storage Device, or
as a PC camera for video conferencing on the Internet.
6.3.1 Connecting as a mass storage device
1. Turn the camera on by pressing the ON/OFF button.
2. Press MENU button and press RIGHT key to select the Setup setting.
3. Press ▼button to set USB connection.
4. Press▲or
▼button to choose the Disk Drive mode.
5. Press OK to confirm.
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as a removable
disk.
6.3.2 Connecting as a PC camera
When you connect the camera as a PC camera, you can use the camera as a web cam for video
conferencing on the Internet by using Windows NetMeeting or Windows Messenger.
(You must install the driver before connecting the Digital Camera to your computer. )
1. Turn the camera on by pressing the ON/OFF button.
2. Press MENU button and press RIGHT key to select the Setup setting.
3. Press
▼ button to chook USB connection.
4. Press▲or
▼ button to choose the PC camera mode.
5. Press OK to confirm.
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as a web camera.
7. Trouble shooting
Problem Cause Solution
Cannot turn on the camera by
pressing the “power” button.
Low battery power.
Battery placed at wrong
polarities.
Replace or install the battery
correctly.
Photos can not be saved
when taking pictures.
The memory card or
built-in memory hasn’t
been formatted properly.
Format the memory in SETUP mode
of the camera. Please refer to
section 5.3.
Cannot find removable disk
after connecting the camera
to the computer.
1. Connection failure.
2. The mode of the
camera is not set to
removable disk
properly
1. Make sure all cable connections
are secured and restart the
computer if necessary.
2. Set the camera to removable disk
mode, refer to section 6.3.1
(system setting, USB
connection).
Flash does not work. Battery Power is too low. Replace with new ALKALINE
battery.
The batteries used up very
fast.
Use wrong type of battery. Replace with new ALKALINE
battery.
The photos are over exposure
Set the flash light to force
mode
in bright
environment.
Set the Flash light to Auto mode
.
The photos are blurry
1. The camera is not held
steadily
2. The lens of camera is
dirty
1. Hold the camera steadily until it
beeps when taking photo.
2. Clean the lens with soft dry cloth.
Get a warning message:
“Capture device was not
detected” when trying to open
PC cam.
1. Conflict with another
camera or video
device.
2. The mode of the
camera is not set to
PC cam mode
properly.
1. Remove any other camera driver
completely from your system.
Sometimes you have to re-install
your system.
2. Set the camera to PC cam mode,
refer to section 6.3.2 (system
setting, USB connection).
Cannot preview image in PC
Camera mode.
“Preview” is not selected
in option Menu in PC.
Click “preview” in the “option” menu
to select it.
For EU only
AM-D310K-AGB-CLV-R
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easypix S 318 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easypix S 318 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix S 318

Easypix S 318 User Manual - German - 2 pages

Easypix S 318 User Manual - French - 2 pages

Easypix S 318 User Manual - Italian - 2 pages

Easypix S 318 User Manual - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info