731580
1
Zoom out
Zoom in
Previous page
1/2
Next page
1
USER MANUAL
Product introduction
A Pulse Oximeter is a common device used to check oxygen
saturation (SpO²) and pulse rate.
It is a compact, reliable and durable physiological
monitoring device featuring an OLED display and powered
by batteries (not included).
Intended use
The Pulse Oximeter is reusable device and is intended for
spot checking the pulse oxygen saturation and pulse rate of
adults.
It should not be used for continuous monitoring this
should only be done under the guidance of your doctor.
Restrictions
Use of the device is for adults only.
Please do not use the device for children, infants and
neonatal. The product is not suitable for children under
3 years because of choking hazard.
Safety instructions
The person using the Pulse Oximeter must have read the
instructions for use carefully.
This product should only be used to give an indicative or
reference reading. It should not be used to determine a
diagnosis without consultation with your doctor. Longer
term or ongoing use should only be under the guidance of
your doctor.
If you experience any discomfort in use, please stop
immediately and seek medical help.
When using the Pulse Oximeter the user should pay
attention to, and guarantee safety of the patient being
measured.
The Pulse Oximeter does not feature an alarm function. It
should not be used for continuous monitoring for an
extended period.
Damaged skin tissue can not be measured.
Do not use the device if it has been damaged in any way.
Do not use the device in any way other than that described
in this manual.
Do not to use the Pulse Oximeter during MRI (magnetic
resonance imaging) scanning or CT (Computed
To m o g ra p hy ) environment as the induced current could
potentially cause burns.
The device should not be modified, repaired or serviced in
any way by the end user.
Do not use the Pulse Oximeter in the presence of
flammable anesthetics, explosive substances, vapors or
liquids.
Ensure the device is always clean and free from dirt before
use.
Before cleaning the device, ensure it is turned off.
Do not use high pressure or high temperature to disinfect or
clean the device. Never use cleaning agents/disinfectants
other than those recommended.
The device is a factory sealed unit. Keep its surface dry and
clean, and prevent contact with liquids.
The Pulse Oximeter is precision device. Avoid pressure,
knocks, strong vibration or other mechanical damage.
Please store safely when not in use.
For disposal of Pulse Oximeter and accessories, follow local
regulations regarding disposal of such a device and
accessories. Do not dispose of randomly.
Use AAA alkaline batteries. Do not use carbon or poor
quality batteries. Remove the batteries if the product will
not be used for an extended period of time.
Avoid exposure to static electricity before using the Pulse
Oximeter.
When in use, keep the device away from radio receivers.
To av oi d e n ha nc ed el ec t rom a g n et ic ra di at i o n or r e duc e
anti-electromagnetic interference performance, only use
the device as configured.
Portable and mobile radio frequency communication
equipment can affect the normal use of the pulse oximeter.
Storage environment
The Pulse Oximeter should not be close to or stored with
other equipment.
Always store the device and small parts such as batteries
out of the reach of children.
Always ensure suitable supervision of patients or others
where the device is used on a lanyard.
Box contents
Pulse Oximeter, Lanyard, User manual EN/DE
Technical data
OLED display
SpO²: Measurement range: 70-100%
Accuracy: ±2% (70%-99%)
Pulse rate:
Measurement range: 30-240bpm
Accuracy: ±2bpm
Working voltage: DC3V
Battery type: 2x 1.5V AAA alkaline batteries
are required (not included)
Power consumption: < 30mA
Automatic shutdown after 10 seconds
Use environment: 5°-40°C
Storage environment: -10°-40°C
Ambient humidity: 15%-80%
Atmospheric pressure: 70kPa-106kPa
Size: 58 x 32 x 34 mm
Weight: 50g (with two AAA batteries)
Description of the product
POWER / FUNCTION BUTTON
Function description
The Pulse Oximeter is used to measure arterial oxygen
saturation (SpO²) and the pulse rate. Oxygen saturation
indicates the percentage of haemoglobin in the arterial
blood that is loaded with oxygen.
The Pulse Oximeter uses two light beams of different
wavelengths for measurement. These light beams strike the
inserted finger inside the housing and are put in relation to
each other during measurement. The arterial oxygen
saturation is then calculated and displayed on the Pulse
Oximeter.
1. Infrared Light Emitting 2. Infrared Light receiver
You can also find these instructions online
under the following link.
FR : Un manuel dans votre langue est disponible
sur Internet:
IT: Il manuale nella sua lingua può essere
trovato su Internet:
ES: Puede encontrar un manual en su idioma en
Internet:
PT: Um manual em seu idioma pode ser
encontrado na Internet:
PL: Instrukcję w swoim języku możesz znaleźć na
stronie:
SWE: En handbok på ditt språk finns på Internet:
NL: Een handleiding in uw taal vindt u op
internet:
www.easypix.info/download-
manuals/download/pulseoximeter-po2/
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easypix PulseOximeter PO2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easypix PulseOximeter PO2 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix PulseOximeter PO2

Easypix PulseOximeter PO2 User Manual - German - 2 pages

Easypix PulseOximeter PO2 User Manual - Dutch - 2 pages

Easypix PulseOximeter PO2 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info