582856

Easypix DV5200 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
5
Photo / Video counter
Photo mode :No. of balance picture can be taken;
Video mode: Balance of recording time in second;
Playback mode: The No. of pictures or video file.
6
Selected Resolution
12M= 4032x3024
8M= 3264x2448
5M= 2560x1920;
3.1M = 2048x1536;
2M= 1600x1200
1.3M= 1280x960;
VGA= 640x480;
QVGA= 320x240
7
Flash indicator
: Force flash.
: Auto Flash: The camera determines if the flash
must be used or not.
: No Flash: The flash is turned off.
8
Picture quality
The quality is fine (Default).
The quality is standard.
The quality is economy.
9
Brightness Alert
Alert user to hold the camera steadily.
10
Normal / Macro
mode indicator
Normal mode (0.5m – infinity)
Macro mode (11cm –18cm)
11
View center
5. Using the DV(camera)
5.1 Installing the batteries
1. Open the battery door.
2. Insert3x AAA alkaline batteries into the camera.
3. Turn on the DV (camera).
Press the POWER button or open the LCD panel to turn on it.
5.2 Inserting a memory card (not included)
This DV (camera) has built-in internal memory. This memory can be extended with a SD memory
card (not included).
Follow the instructions given below to insert the optional SD memory card into the camera.
1. Turn off the camera first.
2. Insert the SD card into the camera.
Note: There is only one right direction to insert the SD memory card into the slot. Do not force the
card into the slot, or else it may damage both the camera and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See the following
sections for more information.
5.3 Formatting the memory or SD card
1. Press Menu button
2. Select Setup setting by Menu key.
3. Press REC to confirm and select by up or down key.
4. Press REC to format the card or memory.
5.4 Setting the resolution
The DV (camera) can be set to different resolutions.
1. Press MENU to set proper resolution.
Resolution: VGA（640 x 480），1.3M（1280 x 960），2.0M（1600 x 1200），
3.1M (2048 x 1536), 5M (2560 x 1920), 8M (3264 x 2448), 12M (4032 x 3024)
2. Different resolutions will be displayed. Select the desired resolution by using the
▲ or ▼
buttons and then press the REC button to confirm the selection.
5.5 Taking Video or photographs
1. Turn on the DV（camera）.
2. Slide MODE to set the DV to photo mode (
) or mode( ).
3. Depending on the distance to the object being photographed, use Macro switch to
adjust the distance. Select the flower symbol (
) if you wish to take a close-up
photograph (11cm –18cm).
If you wish to take Video or photograph of surroundings or people (0.5m - infinity), set the
Macro switch to Normal mode (
).
4. If you are not sure if there is enough lighting, turn the automatic flash (
) on by pressing
the flash button (
▼/ ).
5. Use the LCD screen to aim the object you wish to take video or photograph.
6. Press REC button.
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The DV can zoom in up to 8 times.
Zoom in or out by pressing the
or button, a number will appear on the display. 8.0 is the
maximum zoom.
5.7 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph for yourself or when you
wish to photograph for an object where the camera must be as still as possible.
1. Set the camera to photo mode.
2. Press the MENU button. The quick menu will appear.
3. Press
▼ to self-timer mode, press REC and ▲or ▼ to set the delay time: 2seconds / 10
seconds / 10+2seconds or off.
4. Press the REC button to confirm. The self-timer function is now ready for use.
5. Aim at the object you wish to photograph.
6. Press the REC button to take a photograph.
7. The photograph will be taken after the timer reaches the delay time that you pre-set, and
the camera will beep once.
5.8 Playback photographs
1. Press button to playback mode, and ▲ or ▼ to select the video clip or photo.
2. Press,
or to zoom the image.
3. Press MENU to select SLIDE SHOW, and then press REC to confirm. The pictures saved
in your camera or your SD card will be displayed in sequence automatically.
5.9 Playback video clips
1. When video clips are displayed, press REC to play, and press DOWN key to stop.
2. Press REC to pause the playback
3. Press Playback to exit.
5.10 Delete photographs and video clips
Follow the instructions given below to delete photograph or video.
1. Press PLAYBACK to enter Playback mode.
2. Press the MENU button and select Delete Single/Delete All, press REC to confirm.
3. If you select Protect picture, your current file or images can not be deleted.
4. Press MENU to exit.
NOTE: Select ‘Deleting All’ and Press REC to confirm, all the pictures will be deleted.
6. Connecting to a PC
By connecting the camera to a PC, your system be expanded to fill a wide range of uses. Using
the ‘ ARCSOFT MEDIAIMPRESSION” performs images saving, browsing, file management,
printing photos, email photos and upload videos to YOUTUBE.
Also the unit can be connected to the computer as Mass Storage Device,
Autorun function (Option)
When you connect the Digital Camera to the PC,a simple Arcsoft Media Impression software
which inside the memory will run automatically.
As different from user setting on the computer, the software may not be launched automatically.
Please double click the icon inside COMPUTER.
Note: Autorun function is only compatible with Windows XP / Vista.
Note: Under the environment with electrostatic discharge, the sample may malfunction and
memory lost. It requires user re-install the battery to reset the sample.
7. Trouble shooting
Problem Cause Solution
Cannot turn on the DV
(camera) by opening the LCD
panel.
Low battery power.
Battery placed at wrong
polarities.
Replace or install the battery
correctly.
Try to open the DV (camera) by
pressing the power button.
Photos can not be saved
when taking pictures.
The memory card or built-in
memory hasn’t been
formatted properly.
Format the memory in SETUP
mode of the camera. Please refer
to section 5.3.
Cannot find removable disk
after connecting the camera
to the computer.
Connection failure.
Make sure all cable connections
are secured and restart the
computer if necessary.
Flash does not work. Battery Power is too low. Replace with new ALKALINE
battery.
The batteries used up very
fast.
Use wrong type of battery. Replace with new ALKALINE
battery.
The photos are over
exposure
Set the flash light to force
mode
in bright
environment.
Set the Flash light to Auto
mode .
The video photos are blurry
1. The DV (camera) is not
held steadily
2. The lens of DV (camera) is
dirty.
3. The DV (camera) is Set to
wrong macro mode.
1. Hold the DV (camera) steadily
until it beeps when taking
video photo.
2. Clean the lens with soft dry
cloth.
3. Set the macro mode according
to the distances of subject.
For EU only
AM-DV521K-AGB-CLV-R
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easypix DV5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easypix DV5200 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix DV5200

Easypix DV5200 User Manual - German - 2 pages

Easypix DV5200 User Manual - French - 2 pages

Easypix DV5200 User Manual - Italian - 2 pages

Easypix DV5200 User Manual - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info