703725

Easymaxx PL2SAB - Z05126 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
EN Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆ +49 38851 314650 *)
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
Dear Customer,
We are delighted that you have chosen this LED lantern. If you
have any questions, contact the customer service department via
our website:
www.service-shopping.de
Explanation of Symbols
Safety instructions: Read these carefully and follow
them to prevent personal injury and damage to prop-
erty.
Circuit symbol for direct current
Read instructions before use!
Explanation of the Signal Words
WARNING warns of possible serious injuries and danger to
life
CAUTION warns of slight to moderate injuries
NOTE warns of damage to property
Intended Use
• This article is suitable for use as a decorative feature indoors.
• The article is not suitable for use outdoors.
• The article is not a toy. Do not leave children and animals un-
supervised with the article!
• The article is for personal use only and is not intended for com-
mercial applications.
• The article should only be used as described in these instruc-
tions. Any other use is deemed to be improper.
• The following are excluded from the warranty: all defects
caused by improper handling, damage or unauthorised at-
tempts at repair. This also applies to normal wear and tear.
Safety Instructions
WARNING – Dangers of Injury!
■ Danger of Suffocation! Keep the packaging material away
from children and animals.
■ Danger of Burns from Battery Acid! Batteries can be deadly
if swallowed. Keep batteries and articles out of the reach of
children and animals. If a battery is swallowed, seek medical
assistance immediately.
■ Danger of Burns from Battery Acid! If a battery leaks, avoid
physical contact with the battery acid. Wear protective gloves
if necessary. If you touch battery acid, rinse the affected area
with abundant fresh water immediately and contact a doctor as
soon as possible.
NOTE – Risk of Damage to Material and Property
■ Do not use the article in rooms with elevated humidity, e.g.
bathrooms.
■ Use only the battery type specifi ed in the “Technical Data”.
■ Take batteries out of the article when they are dead or if the
article is not going to be used for a prolonged period. This will
prevent any damage if a battery leaks.
■ Batteries must not be recharged or reactivated by other means,
dismantled, thrown into a fi re, immersed in fl uids, or short-cir-
cuited.
■ Protect the article from: impacts, heat, direct sunlight, sub-zero
temperatures, moisture and wet conditions.
■ Ensure that the article cannot come into contact with water!
■ Never clean the article with scouring sponges or scouring
agents or aggressive liquids such as petrol or acetone. These
can damage the surface. Just dust it down if necessary.
■ Do not place any containers fi lled with liquid, for example vas-
es, directly next to the article.
■ Do not make any changes to the article and do not attempt to
repair it. In the event of any damage, please contact our cus-
tomer service department. The individual LEDs cannot be re-
placed.
Items Supplied
Check the items supplied for completeness and transport dam-
age. If you fi nd any damage, do not use the article (!), but rather
contact the customer service department immediately.
• LED Lantern
• Instructions
Inserting / Changing Batteries
Insert two 1.5 V batteries, C, Baby type into the battery compart-
ment on the bottom of the lantern before you fi rst use it. These are
not supplied with the article.
Before inserting the batteries, check whether the contacts are
clean and clean them if necessary.
1. Open the battery compartment: Undo the screw on the battery
compartment cover using a standard cross-head screwdriver.
Pull up the cover.
2. Insert two 1.5 V batteries of the C, Baby type into the battery
compartment. Ensure the correct
polarity (+ / –).
3. Place on the battery compartment cover.
When you do this,
make sure that the locking lugs sit in the recesses which are
provided for them. Tighten the screw again.
Replace the batteries when the power of the lights starts to wane.
PLEASE NOTE! Always replace all batteries together. Do not use
batteries of different types or brands, or batteries with different
capacities.
Use
• Switch on – Slide the On / Off switch on the bottom of the
lantern to the ON position.
• Switch off – Slide the On / Off switch on the bottom of the
lantern to the OFF position.
Technical Data
Article number: 05126
Model number: PL2SAB
Voltage:
3 V DC
(2 x 1.5 V batteries, C, Baby type)
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner
at a recycling centre for used electrical and electronic
devices. More information is available from your local
authorities.
Batteries should be removed prior to disposal of the article
and disposed of separately from the article at suitable col-
lection points.
Z 05126 M DS V1 1117
Article number: 05126
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx PL2SAB - Z05126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx PL2SAB - Z05126 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info