703734

Easymaxx KS-CL117 - Z04853 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
EN Operating Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
ᅏ +49 38851 314650 *)
*) Calls to German landlines are subject to your provider’s charges.
All rights reserved.
Dear Customer,
Thank you for choosing this LED candle with projector. If you
have any questions, please contact customer service through our
website:
www.dspro.de/kundenservice
Explanation of symbols and signal words
Danger symbol: This symbol indicates danger of physical
injury. Read the associated safety instructions carefully,
and comply with them.
Wiring symbol for direct current
Read operating instructions before using!
WARNING warns of possible serious injuries and danger to
life
NOTICE warns of material damage
Intended use
• The product is used for decorating interior spaces. The product
is not a toy.
• The product is intended for private, non-commercial use. Only
use it as described in these operating instructions. Any other
use is regarded as improper use.
WARNING – risk of injury
■ Risk of suff ocation! Keep children and animals away from
plastic bags and foils.
■ Danger of chemical burn from battery acid!
– Batteries can be life-threatening if swallowed! Therefore,
keep the batteries and product out of reach of children and
animals. If a battery has been swallowed, seek medical help
immediately.
– If a battery leaks avoid physical contact with the battery acid.
Wear protective gloves. Should this occur, rinse the aff ected
areas immediately with plenty of clean water and seek
medical attention immediately.
NOTICE – risk of material and property damage
■ Only use the battery type specifi ed in the technical data.
■ Always replace all batteries. Do not use diff erent battery types
or brands, or batteries with diff erent capacities. When changing
batteries, pay attention to the polarity (+ / –).
■ Remove batteries if they are used or if the product will not be
used for a long time. This helps prevent damage from leaks.
■ Remove leaking batteries immediately.
■ Never submerge the product in water or other liquids!
■ Protect the product from heat, open fl ames, direct sunlight,
sub-zero temperatures, prolonged humidity, moisture and im-
pacts.
■ The LED cannot be replaced.
■ Never use harsh or corrosive cleaning agents or rough sponges
when cleaning. These can damage the surface.
■ Do not disassemble the product or try to repair it. In case of
damage contact customer service.
Included in delivery
• 1 x LED candle with projector
• 4 X Motif stencils (1 x Hearts, 1 x Snowfl akes, 1 x Christmas,
1 x Easter)
• 1 x operating instructions
Please note: 3 batteries (1.5 V; type AAA) are required for
operation. These are not included in the delivery.
Check the scope of delivery for completeness, and the compo-
nents for possible transport damage. If the product is damaged,
do not use the product but contact customer service immediately.
Insert / change batteries
Before inserting the batteries, check whether the contacts on the
product and the batteries are clean, and clean them if needed.
1. Open the battery compartment on the underside of the candle:
Press down on the locking mechanism and remove the battery
compartment lid.
2. If necessary, remove the used batteries and replace them with
3 new batteries (1.5 V
; type AAA). Make sure the poles are
aligned correctly (+ / –).
3. Insert the battery compartment lid and close it. There should
be an audible click as it locks into place.
Replace the batteries if the candle’s performance is weakening.
Usage
1. Insert the desired motif stencil into the slot on the side of the
candle. In doing so, pay attention to the arrow on the motif
stencil.
2. Slide the switch on the underside of the candle to the ON posi-
tion to turn it on.
3. To turn off the candle, slide the switch to the OFF position.
Cleaning and storage
• Clean and wipe the product with a soft, dry cloth. Heavy soiling
can be wiped with a damp cloth.
• When not in use, keep the product out of reach of children and
animals in a dry place away from direct sunlight.
Technical data
Article number: 04853
Model number: KS-CL117
Power supply:
4.5 V DC (3 x 1.5 V batteries; type AAA)
Instruction manual ID: Z 04853 M DS V1 0719
Disposal
Dispose of the packaging an environmentally sound way
and take recyclables to collection facilities.
Remove batteries before disposing of the product and take
them to the appropriate collection site separately from the
product.
This product is subject to European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE). Do
not dispose of the product as normal household waste, but
through an offi cially approved disposal business according
to environmental regulations.
Article number: 04853
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx KS-CL117 - Z04853 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx KS-CL117 - Z04853 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info