612447
1
Zoom out
Zoom in
Previous page
1/2
Next page
Connect the Aeon Labs Siren to your alarm system Quick install Guide
www.e-domotica.com 1
Connect the Aeotec ZW080 Siren to your Alarm System
The Aeotec ZW080 Siren can be used to connect to your e-Domotica alarm system. This means the siren will make a loud noise the
moment the alarm has been activated. In this manual you will learn how to connect the siren to your e-Centre, how you can integrate it
in different scenes, how you can create a countdown and how you can connect the siren to your alarm situation.
1. Logging in to your e-Centre
Start your computer or notebook.
Open a browser, for example Chrome or Firefox.
Open the e-Centre webpage via http://ecentre. Or go to the IP address of
the e-Centre, for example http://192.168.1.100.
Log in with the standard PIN code 1234, or use your own PIN code.
2. Add the Aeotec Siren to your e-Centre
For starters we will learn how to add your siren to the e-Centre. Please follow
the steps below to proceed:
Go to ‘e-Domotica Products’
Click ‘Include’ at the right corner
Click the action button once. In the picture on the left you can see where
you can find the action button
Wait for the e-Centre to find the siren. When finished name it, choose a
location and choose an icon. When done click ‘Save’.
Apply the settings. In our example we chose the settings below:
Name: Siren
Location: Hallway
Icon: Siren
As told before you can save the settings by clicking the ‘Save-button.
3. Add scenes to your e-Centre
Up next we will create a scene that will be activated when the alarm has been
activated. Please follow the next steps:
Go to ‘Scenes’
At the right down corner click ‘Add’
Name the scene. For example: ‘Siren on
Click ‘Add’ again
Fill in the settings below:
o Device: Siren
o Feature: Switch
o Action: Assign to
o Value: On
Besides this we have to add a countdown. In our example we picked 60
seconds:
At the right down corner click ‘Add’
Check the box that says ‘Expert mode’
Apply the settings below:
o Group: Clock
o Feature: Countdown 1
o Action: Assign to
o Value: 60
Save the settings
Save the scene
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for e-Domotica Aeotec ZW080 - Aeon Labs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of e-Domotica Aeotec ZW080 - Aeon Labs in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of e-Domotica Aeotec ZW080 - Aeon Labs

e-Domotica Aeotec ZW080 - Aeon Labs Quick start guide - German - 3 pages

e-Domotica Aeotec ZW080 - Aeon Labs Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info