The Dyson Airblade Tap hand dryer should be cleaned daily.
Follow these 3 simple steps to ensure the machine performs
to its best and remains hygienic. Using the wrong cleaning
method or product may invalidate the warranty.
Keep it clean
Important information
Do not pressure wash the machine.
All cleaning chemicals should be used
exactly as indicated by the manufacturer’s
instructions (including appropriate dilution).
If a cleaning product is left on the
machine for too long, a film will form.
This may reduce the effectiveness of
the anti-microbial surfaces.
Any chemicals intended for use should
first be tested on an inconspicuous area
to confirm suitability. Aside from cleaning
chemicals, care should be taken to avoid
any harmful fluids from coming into contact
with the product, in particular oils and
alcohol-based products.
Chemical guidelines
Most professional cleaning chemicals
can be used. The following are some
that are harmful to the machine.
Change kits
Designed for machines with high usage,
the HEPA filter kit provides everything
needed to change the machine’s HEPA
filter on site.
If you experience any issues with the
solenoid or aerator, replacement kits
can also be provided.
For these kits or a replacement cleaning
cap, contact your local Dyson helpline.
Contact us for more information:
0800 345 7788
info@dysonairblade.co.uk
www.dysonairblade.co.uk
Alcohol-acid mixes
Alcohol
Solvent /oil-based mixes
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners
DO NOT USE:
Wipe sensors using a soft
cloth and non-abrasive
cleaner then place
cleaning cap over sensors
to prevent air and water
from being activated.
Clean all tap surfaces,
sink, mirror and any walls
or counter tops. When
complete REMEMBER to
remove cleaning cap.
REGULARLY clean air inlets
on base of motor bucket
(under sink). Ensure plughole
in sink is free from blockages
so water can drain freely.
123
JN: 60790 12.09.13
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dyson Airblade Wash and Dry WD04 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dyson Airblade Wash and Dry WD04 in the language / languages: English as an attachment in your email.
The manual is 0,08 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Dyson Airblade Wash and Dry WD04
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.