648115
21
Zoom out
Zoom in
Previous page
1/22
Next page
Why is the battery not lasting long (less than two hours after fully charged)?
To maximize battery usage, please follow these steps:
RESET the unit(s) while getting charged.
Charge the battery for at least 8 hours.
Unplug the power adapter and use the unit(s) on battery power until it shuts down by
itself.
Repeat steps 2 and 3 for 2 more times.
With each charge you will find out that the battery will last longer than the previous time. If
you do not use the unit(s) on battery power on a regular basis, we recommend you to use the
unit(s) on battery power until it shuts down on its own at least one a week use, to optimize
battery usage and life.
I installed the micro SD card, why does it still display “No SD card”?
Before installing the micro SD card, please turn off the parent unit. If you install the micro SD
card in ON mode, please press the RESET button to restart the parent unit.
The parent unit displays multi view (4 cameras). How to change to full screen display mode?
Quickly press the POWER / MULTI / BACK button to exit / enable multi view display.
How come the parent unit does not take any pictures and/or videos?
There is no micro SD card in the receiver unit. Insert an appropriate micro SD card in the
receiver unit.
The memory capacity of the micro SD card inserted is full. Delete any existing recordings
or replace the micro SD card in the receiver unit with a new one.
Why does the baby unit not transmit any audio/video signals?
The sensitivity of the voice activation (VOX) and/or motion detection is set too low. Please
Why does parent unit intermittently displays “Connecting camera #...” error message
and/or a black screen (no video)?
This problem is normally caused by presence of other wireless devices, especially a wireless
network router/adapter or another wireless Audio/Video device using 2.4GHz wireless
frequency.
We suggest to:
Why does the parent unit display “Camera # unavailable” error message?
“Camera # unavailable" message normally appears if you are using a single baby unit (or
only one baby unit is registered) but you have set Auto Scan to a setting other than
"Never".
Why doesn’t my monitor work on rechargeable battery even when the battery charging
level indicator shows battery is fully charged?
If the battery charging level indicator shows battery is fully charged as soon as you plug the
power adapter to the monitor, then it's possible that the battery is not installed properly.
Press the RESET button on the camera to change communication channel between the
units.
Change the wireless channel setting of your router from AUTO to either lower channels
2 or 3 (if that does not help then upper channels 10 or 11) to reduce interference from
wireless network.
If possible, do not keep other wireless devices within 3-5meters from camera and
monitor.
40 41
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duux Video baby monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duux Video baby monitor in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Duux Video baby monitor

Duux Video baby monitor User Manual - German - 42 pages

Duux Video baby monitor User Manual - Dutch - 42 pages

Duux Video baby monitor User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info