612054
10
Zoom out
Zoom in
Previous page
1/12
Next page
3. Operating the sewing machine
3.1 Threading the needle
thread
Turn off the main switch of the
machine.
Otherwise there is danger of injury!
Thread the needle as shown in the
figure.
3.2 Winding the bobbin thread
Slip the bobbin 4 onto the bobbin
winder 3.
Pull the thread through the guide 1
and the tension assembly 2.
Wind the thread clockwise approx. 5
times around the bobbin core and
tear off at the thread clamp 6.
Press the bobbin winder lever 5 into
the bobbin.
Sewing
The bobbin winder lever stops the
winding process, when the bobbin is
fully wound.
If the thread is not to be wound during
sewing, the foot
must be locked in its
lifted position and the foot stroke must
be set at its smallest value.
3.3 Changing the bobbin
Turn off main switch.
Otherwise there is danger of injury!
Pull out the slide plate 7.
Remove the bobbin case cap 8 with
the bobbin 11.
To do this, grasp under the nose 10 of
the bobbin case cap.
Remove the bobbin.
Install the fully wound bobbin such
that the bobbin turns in the direction
shown in the figure, when thread is
drawn.
Pull the thread through the slot 16,
under the spring 14, through the slot
13, and from the inside to the outside
through the hole 12.
Install the bobbin case cap with the
bobbin and close the latch 9.
Push in the slide plate.
3.4 Setting the bobbin thread
tension
Turn off the main switch of the
machine.
Otherwise there is danger of injury!
Pull out the slide plate 7.
Remove the bobbin case cap 8 with
the bobbin 11. To do this, grasp under
the nose 10 of the bobbin case cap.
Turn the set screw 15 accordingly.
Install the bobbin case cap with the
bobbin and close the latch 9.
Push in the slide plate.
12
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler N291 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler N291 in the language / languages: English as an attachment in your email.

The manual is 0,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler N291

Durkopp Adler N291 User Manual - German - 12 pages

Durkopp Adler N291 User Manual - Dutch - 12 pages

Durkopp Adler N291 User Manual - French - 12 pages

Durkopp Adler N291 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info