612094
4
Zoom out
Zoom in
Previous page
1/24
Next page
General safety instructions
The non-observance of the following safety instructions can cause
injuries of damages to the machine.
bodily
1. The machine must only be ommissioned in full knowledge of the instruction
book and operated by persons with appropriate training.
2. Before putting into service also read the safety rules and Instructions
of the motor supplier.
3. The machine must be used only for the purpose intended. use of the
machine without the safety devices is not permitted. ubserve all the
relevant safety regulations.
4. When gauge parts are exchanged (e.g. needle, presser foot, needle
plate,feed dog and bobbin)when threading,when the workplace is left,
and during service work, the machine must be disconnected from the
mains by switching off the master switch ordisconnecting the mains
plug.
5. Daily servicing work must be carried out only by appropriately
persons.
6. Repairs, conversion and special maintenance work must only be
out by technicians or persons with appropriate training.
7. For service or repair work on pneumatic systems, disconnect the
from the compressed air supply system ( max. 7-10 bar).
reduce the pressure of the maintenance
adjustments and functions checks
8. Work on the electrical equipment must be carried out only by
or appropriately trained persons.
9. Work on parts and systems under electric current is not permitted ,
as specified in regulations DIN VDE 0105.
10. Conversion or changes to the machine must be authorized by us
only in adherence to all safety regulations.
11.For repairs, only replacement parts approved by us must be used.
12. Commissioning of the sewing head is prohibited until such tim e
entire sewing unit is found to comply with EC directives.
trained
carried
machine
Before disconnecting,
unit. Exceptions to this are only
made by appropriately trained technicians.
electricians
except
and made
as the
It is absolutely necessary to respect
the safety instructions marked by these signs.
Please note also the general safety instructions.
Danger of bodily injuries!
!
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 7700 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info