612677
11
Zoom out
Zoom in
Previous page
1/14
Next page
2.8 Setting the Controls
The setting of the controls is explained in detail in Part 4: Microcontrol
Summary !
At this point only those settings necessary for the sewing procedure
are listed.
Turn main switch on !
The programming of the controls occurs with the main switch turned
on !
The machine is not to be started unintentionally.
Set the
" Program "
switch to
" 01 "
or
" 02"
.
The sewing program is selected.
Push the
" STOP "
button.
The sewing program is activated.
Setting the seam length.
Press button
" L1 "
or
" L2 "
or
" L3 "
.
Set the desired value with the
" + "
or
" - "
.
Establishing the seam length with the light barrier.
Press the button.
Setting the soft start.
Press the button.
The diode is lit when the function is selected.
Setting stitch condensing at the seam beginning.
Press the button.
The diode is lit when the function is selected.
Setting stitch condensing at the seam end.
Press the button.
The diode is lit when the function is selected.
Setting the remover.
Press the button.
The diode is lit when the function is selected.
Setting the blower from the top or to the right.
Press the button.
Pressing the button repeatedly switches between the functions
"top/right/off".
The left diode is lit when the function
" Blower from the top " is selected.
The right diode is lit when the function
" Blower from the right " is selected.
Setting the normal stitches and the stitch condensing.
Press the button.
The left line of display indicated the number (0 to 20) of regular
stitches up to the stitch condensing.
Set the desired value with the
" + "
or
" - "
.
Press the button.
The right line of display indicated the number (0 to 8) of
condensed stitches.
Set the desired value with the
" + "
or
" - "
.
Press the button. (The engagement is finish.)
The controls are now completely set.
13
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 743-121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 743-121 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 743-121

Durkopp Adler 743-121 User Manual - German - 13 pages

Durkopp Adler 743-121 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info