612677
4
Zoom out
Zoom in
Previous page
1/14
Next page
1.3 Optional Equipment
0794 013222
Bundle clamp with swing arm and holder pipehr.
0794 000091
Supporting table (small).
(only in conjunction with the bundle clamp)
0794 000332
Remover device for smoothing the blown-out
sewing pieces.
(only in conjunction with the bundle clamp)
0794 013333
Blower pipe from the top or the right.
0794 013444
Supporting table
(when using in-house bundle clamp wagons)
0797 003031
Compressed air connection hose, connector
plug,
connector socket and hose clamp.
2. Operating the Sewing Unit
2.1 Needles and Threads
Needle system: 934 SIN
Needle thickness: Nm 90
Threads: As needle and bobbin thread spun
sewing threads
2.2 Threading
Caution Risk of Injury !
Turn main switch off.
Upper and lower threads may only be threaded with the machine
switched off.
The configuration set must be in the left end position.
Threading lower thread (Bobbin thread)
Place thread spool 2 on the thread stand.
Alternatingly feed the thread through all 4 guide eyes of the take
off arm 1.
Unlock the slider bed and pull to the side.
Guide the thread through the thread tensioner 4 + 5 and the thread
guide 12.
Swing up the flap 13 over the thread take up disk. Guide the thread
to the right past the pins.
Lead the thread through the hook 14 and pull tight.
Close the flap 13 over the thread take up disk.
The thread must be in the flap slot.
Return the slider bed to its initial position.
Hereby the leaf spring must lock in place.
Threading the upper thread (Needle thread)
Place thread spool 3 on the thread stand.
Alternatingly guide the thread through all 4 guide eyes of the
takeoff arm 1.
Guide the thread through the thread tensioner 6 + 7, thread guide
9, check spring 10 and thread monitor 11.
Lead the thread through the needle and the thread clamp.
Cut of the excess at the thread trimmer.
6
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 743-121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 743-121 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 743-121

Durkopp Adler 743-121 User Manual - German - 13 pages

Durkopp Adler 743-121 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info