612050
29
Zoom out
Zoom in
Previous page
1/30
Next page
10. Summary of all sewing machine settings
ATTENTION!
The complete setting of the special sewing machine is to be made in
the order described.
No. Subject Chapter Correct setting Adjustment
1
Zero point, feed
with devices
Setting of the zero point
(position of the stitch
regulator link)
2.1
When the stitch length is set to 0”,
the feed dog and the needle should
not make any advancing motion.
Setatthefactory.
2
3
Bottom feed
Position of the feed dog in
the throat plate cutout
Advancing movement of the
feed dog
2.2.1
2.2.2
Sideways:
The feed dog must lie centric in the
throat plate cutout.
In the feeding direction:
At the maximum stitch length, the
minimum clearance of the feed dog
to the front and rear edges of the
throat plate cutout must be approx.
0.5 mm.
When the stitch regulator lever is
operated and set to have the
greatest sewing length, both the
needle and the feed dog should not
move.
Slide the feed dog
axially.
Turn the feed dog
lever on the fork.
Turn the thrust cam.
4 Synchronous run of the
needle and bottom feed
2.3 The needle must penetrate the
middle of the needle hole.
Align the needle bar
with the rocker.
Upper feed
5 Stroke of the upper feed and
the material presser foot
2.4.1 The stroke of material presser foot
and upper feed should be equal.
Turn the upper feed
lever.
6 Advancing movement of the
upper feed foot
2.4.2 The upper feed foot should reach
the top edge of the feed dog at
the same time as the descending
needle.
Turn cam.
Stitch regulator
8 Stitch uniformity of forward
and reverse stitching
2.5 The stitch length for forward and
reverse sewing must be equal.
Turn the cam
located inside the
cast iron.
25
GB
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 69-373 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 69-373 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info