613279
49
Zoom out
Zoom in
Previous page
1/51
Next page
6. Setting of positioning motor
The function of the positioning motor is determined by its program,
setting of the motor parameters and the machine stop positions.
If the sewing machine is supplied as disassembled, the motor setting
must be performed by the purchaser. If the sewing machine is supplied
as complete, the motor is already set by the sewing machine
manufacturer.
6.1 Setting of motor parameters
Attention!
Change of the parameter values must be performed responsibly and
with consideration. A wrongly set control may cause the machine
damage!
Warning!
Through the so-called reset (see section 6.3) all parameter values can
be set up back to the pre-set values.
6.1.1 Parameter values for DC1550/DA321G motor
The description of parameter entering is in the publication attached by
the motor manufacturer “Efka Operation Instructions” or on the website
www.efka.net.
For machines with gear rate 1:1 and with the toothed belt
Parameter Original value New value Parameter description
290* 0 19 Machine class
270 6 0 Choice of sensor type
111 1000 - Max. sewing speed
170 - - Reference position (see 6.2.1)
190 170 120 Switch on angle of thread trimmer
192 160 140 Delay angle of tensioner release
272 1063 1000 Gear rate
For machines with another gear rate and with another belt
Parameter Original value New value Parameter description
290* 0 19 Machine class
111 1000 - Max. sewing speed
170 - - Reference position (see 6.2.1)
190 170 120 Switch on angle of thread trimmer
192 160 140 Delay angle of tensioner release
* Parameter necessary to be entered as the first.
Warning:
To set parameters higher than 200 it is necessary to enter the control with a programmer´s authorization (through
code 3112). The access is then enabled to parameters lower than 200.
18
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 52Xi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 52Xi in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 52Xi

Durkopp Adler 52Xi User Manual - German - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info