613282
49
Zoom out
Zoom in
Previous page
1/51
Next page
6. Einstellung des Positionierantriebes
Funktion des Positionierantriebes ist durch Programm, Einstellung von
Parametern des Antriebes und Einstellung der Positionen von
Motorstopp bestimmt. Wenn die Maschine nicht komplettiert
angeliefert wird, muss die Einstellung des Antriebes vom Käufer
vorgenommen werden. Wenn die Nähmaschine komplettiert angeliefert
wird, ist der Antrieb schon vom Hersteller der Nähmaschine
eingestellt.
6.1 Einstellung von Parametern des Antriebes
Achtung!
Die Änderung der Parameterwerte muss sorgfältig vorgenommen
werden. Die falsch eingestellte Steuerung kann
Nähmaschinenbeschädigung verursachen!
Hinw eis!
Durch das sogenannte Reset (siehe Kapitel 6.3) können alle
Parameterwerte wieder an die voreingestellten (pre-set) Werte
eingestellt werden.
6.1.1 Parameterwerte des DC1550/DA321G Antriebes
Die Beschreibung der Parametereinstellung ist in der vom
Antriebhersteller beigefügten Broschüre “Bedienanleitung Efka” oder
an der Webseite www.efka.net zu finden.
Für Maschinen mit dem Übertragungsverhältnis 1:1 und mit dem Zahnriemen
Parameter Ursprünglicher Wert Neuer Wert Beschreibung des Parameters
290* 0 19 Nähmaschinenklasse
270 6 0 Wahl des Positiongebers
111 1000 - Nähgeschwindigkeit
170 - - Referenzposition (siehe 6.2.1)
190 170 120 Winkel der Einschaltung des Beschneidens
192 160 140 Winkel der Verzögerung der Entspanung
des Spanners
272 1063 1000 Übertragungsverhältnis
Für Maschinen mit einem anderen Übertragungsverhältnis und mit einem anderen Riemen
Parameter Ursprünglicher Wert Neuer Wert Beschreibung des Parameters
290* 0 19 Nähmaschinenklasse
111 1000 - Nähgeschwindigkeit
170 - - Referenzposition (siehe 6.2.1)
190 170 120 Winkel der Einschaltung des Beschneidens
192 160 140 Winkel der Verzögerung der Entspanung
des Spanners
* Parameter muss als der erste eingestellt werden.
Hinweis:
Um die Parameter einzustellen, die höher als 200 sind, ist es notwendig, die Steuerung mit der
Programmierberechtigung einzutreten (mittels der Code 3112). Der Zutritt ist dann auch zu den Parametern, die als
200 niedriger sind, ermöglicht.
18
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 523i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 523i in the language / languages: German as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 523i

Durkopp Adler 523i User Manual - English - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info