634041
4
Zoom out
Zoom in
Previous page
1/18
Next page
1.2 Datos técnicos
sub-modelo
Puntadas/min1234567
máx.
de
fábrica
271-140041 5500 4800 4mm x
271-140042 5500 4800 4mm x x x
271-240042 5500 4800 4mm x x x x
272-140041 5000 4800 4mm x
272-140042 5000 4800 4mm x x x
272-160062* 5000 4000 6mm x x x
272-640141 5000 4800 4mm x x
272-640142 5000 4800 4mm x x x x
272-740142 5000 4800 4mm x x x x
273-140042 5500 4800 4mm x x x
274-140042 5000 4800 4mm x x x
* Garfio de gran capacidad = 70% mayor capacidad de la canilla de hilo inferior que con
el garfio estándar.
En 1: Longitud máxima de puntada según sub-modelo.
En 2: Cortador de hilo para hilo superior e inferior
En 3: Sistema electromagnético automático de remate. Se conecta mediante el pedal
y realiza las siguientes funciones: Bajar el prensatelas, rematar el principio y el
fin de la costura, cortar el hilo superior y el inferior, levantar el prensatelas.
En 4: Pulsadores en la cabeza del brazo:
- Aguja Arriba - Abajo
- Presillado con. - Función de presillado desconectada en el panel de mando
- Presillado suprimido - Función de presillado conectada en el panel de mando
- Presillado dentro del curso de la costura
En 5: Cortador de cantos a la derecha junto a la aguja. Conectable y desconectable
mediante palanca manual, o también electroneumáticamente mediante una
tecla, como equipamiento adicional. Según el equipo de costura (E-Nº), la
distancia de corte es de 3,5; 5,0; 8,0 ó 10 mm. Son necesarios equipos de
costura especiales para un corte escalonado. La carrera de la cuchilla es de 5,5
mm.
En 6: Cortador de cantos, pero con electromotor separado. Se pueden conmutar dos
velocidades de corte.
En 7: Cortador de cantos que incide transversalmente el canto de la costura durante
el cosido, p. ej., para el "vertido" exento de tensiones de: escotes, cuellos,
agujeros para el brazo redondos. La incisión se efectúa después de cada 6
puntadas. Sobre demanda, después de 4 puntadas. La profundidad de incisión
es de 15 mm como máximo y se puede ajustar hasta aprox. 1 mm junto a la
costura.
Sistema de aguja: 134, 797 ó Sy 1955-01
Paso debajo del prensatelas
Al subirlo: 8,0mm en las 271 y 273
9,5mm en las 272 y 274
Al coser: 8,0mm
Presión de trabajo: 6bar
Consumo de aire: 0,02 Nl por ciclo de trabajo en las 273 y 274
0,1 Nl por ciclo de trabajo en la 272-740142
mm
6
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 271 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 271 in the language / languages: Spanish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 271

Durkopp Adler 271 User Manual - English - 18 pages

Durkopp Adler 271 User Manual - German - 18 pages

Durkopp Adler 271 User Manual - Dutch - 18 pages

Durkopp Adler 271 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info