634041
5
Zoom out
Zoom in
Previous page
1/18
Next page
Noise Level Lc: Work station specific emmission value to DIN
45635-48-A-1-KL2 by stitch length 3.2mm
271-140041 and 140042 with stitches 4800/min. = 80
dB(A)
272-140041 and 140042 with stitches 4800/min. =
82dB(A)
272-140041 and 140042 with stitches 4500/min. =
80dB(A)
1.3 Optional Equipment
App. 301 Covering hood for the machine head
Z 120 1801 Electro-magnetic thread wiper for 271 and 272
sub-classes -140000 and -160000
Z 120 1851 Electro-magnetic thread wiper for 273 and 274
Z 133 371 Reflected light barrier for automatic sewing stop at
the material end with follow-up functions. For motors
with external control panel V730 or DB5.
Z 116 6741 Electro-pneumatic device for alternating sewing with
two differently set stitch lengths and two differently
set needle thread tensions. Normal seam and seam
with thread drawing (basting stitches). Partial
strengthened tension (Seam thickening) and
ornamental seams.
Z 124 401 Electro-pneumatic operation for on/off switching of
the edge cutters via key for 272-640142.
Z 145 1 Graduated edge cutting (finger version for lightest
materials). In conjunction with the sewing unit 272/E
111 for widths of cut of 4.5 and 7mm.
Z 145-101 Graduated edge cutting (2 knife version for medium
heavy material). In conjunction with sewing unit
272/E 112 for widths of cut of 3.5 and 6,5mm.
722 2041 Container for cutting waste for connection to the
in-house vacuum system. If this is not available then
the appropriate centrifugal blower is to be used.
999 260029 for 3-phase current 380-400V+N, 50Hz
999 260030 for 3-phase current 220-230V, 60Hz
999 260031 for 3-phase current 415-440V, 50Hz
933 5736 Toothed steel roller, 9mm wide for 273 and 274 roller
transport
273 1041 u. 274 1141 Height setting for the pressure foot with hard to
transport material, e.g. velvet.
570 1833 Filter regulator for the compressed air connection
271 661 Parts set, knee lever for pressure foot lift by
machines with automatic bartacker.
271 1671 Parts set, hand lever for seam bartacking for
machines with automatic bartacker.
7
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 271 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 271 in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 271

Durkopp Adler 271 User Manual - German - 18 pages

Durkopp Adler 271 User Manual - Dutch - 18 pages

Durkopp Adler 271 User Manual - French - 18 pages

Durkopp Adler 271 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info