634012
60
Zoom out
Zoom in
Previous page
1/62
Next page
Operating hours Explanation Operating Job
Maintenance Job to be performed
Remove machine head
- Lint and thread waste
.
(e.g. with air blow gun)
Clean
the entire area 1 of the thread guides
under the thread sliding plate
8
Suctioning Device
Empty the container 2 of the s uctioning
device
- Tur n the lower part of the container
to the left and remove the lower part
- Empty the container
- Screw back the lower part
by tur ning it to the right.
8
Pneumatic System
- Check the water level in the
pressure regulator
3
- Clean the filter insert 4
- Check the leak tightness of the
system
Make sure that the water level does not
rise up to the filter insert 4.
- After pressing the drain screw 5,
blow out the water under pressure
from the water separator.
Dirt and condensate are discharged by
means of filter insert 4.
- Separate the sewing unit from the
compressed air supply.
- Press in the drain screw 5.
The pneumatic system of the sewing
unit
must be pressureless.
- Unscrew the water separator 6
- Extract the filter insert 4.
Wash and blow out the contaminated
filter cup and filter insert
with petroleum ether
(no solvent!).
- Reassemble the water separator
and connect the maintenance unit.
40
500
500
56
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 1281-5-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 1281-5-1 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 1281-5-1

Durkopp Adler 1281-5-1 User Manual - English - 14 pages

Durkopp Adler 1281-5-1 User Manual - German - 13 pages

Durkopp Adler 1281-5-1 User Manual - German - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info