471271
1
Zoom out
Zoom in
Previous page
1/8
Next page
®
SPECIFICATIONS
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 4-8 NiCd or NiMH Cells (4.8-9.6V, limited to 7 cells on DC)
Battery capacity range: 600-6000mAh
Fast charge current: 1, 2, or 4A linear (2A limit on AC)
Fast charge termination: peak detection
Fast charge safety timer: 90 minutes
Peak sensitivity: 8mV
Auto-trickle current: 1/20 fast charge setting
Controls: auto-start, switchable current selector
LED indicator: red
Output connections*: built-in lead with standard connector
built-in jack for charging 4, 5, or 8 cell radio packs
Protective devices: solid-state reverse polarity and current overload
Case size: 3.5 x 4.1 x 1.1” (90 x 104 x 29mm)
Weight: 9.17 oz (260 g)
* Charge adapters available separately:
Standard to Vendetta
, Mini Quake
, RS4 Battery (DTXC2210)
Standard to Futaba
®
Tx Charge Jack (DTXP4151)
Standard to Airtronics
®
/Hitec
®
Tx Charge Jack (DTXP4152)
Standard to JR
®
/Spektrum
®
Tx Charge Jack (DTXP4153)
Standard to Deans
®
Ultra
®
male (GPMM3131)
SPECIAL FEATURES
Tiny, lightweight built-in switching AC power supply is great for portability and small pit areas.
Selectable charge currents of 1A, 2A, and 4 amps with auto-trickle function.
Peak detection intelligence eliminates the need for tracking the charge state of the battery before charge, and an
automatic trickle charge tops off packs to maximum power.
An auto-start function with status LED make setup and use a snap.
Compatible with nickel-cadmium (NiCd) and nickel-metal hydride (NiMH) battery types.
Includes a built-in socket for charging 4- or 5-cell receiver batteries, and even 8-cell transmitter batteries.
A DC power lead with alligator clips easily connects to many types of 12V DC power sources.
Solid-state reverse polarity and current overload safety devices ensure trouble-free operation.
INSTRUCTION MANUAL
The Onyx 100 charger is perfect for entry-level electric car or boat
modelers who want automatic peak detection charger for NiCd and
NiMH batteries, and that will accept AC or DC input power. Selectable
charge currents range from 1 to 4 amps, for cells as small as 600mAh
“AAA” and as big as sub-C size – good for 1/18
th
to 1/8
th
scale electric
models. A unique jack is built-in which is handy for charging 4, 5, or 8
cell radio batteries! The small size and light weight make the Onyx 100
charger easy to use at home, or to take to the track.
It is strongly recommended to completely read this manual before use! Damage resulting from misuse
or modification will void your warranty.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duratrax Onyx 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duratrax Onyx 100 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info