35295
2
Zoom out
Zoom in
Previous page
1/2
Next page
1. Handle
2. Cassette deck
operation controls
PAUSE button
STOP button
F.FWD button
REW button
PLAY button
RECORD button
3. CD REPEAT button
4. CD STOP button
5. CD PLAY / PAUSE button
6. CD door
AC POWER
You can power your portable stereo system by plugging the detachable AC
power cord into the AC inlet on the back of the unit and into a wall AC
power outlet.
Check that the rated voltage of your unit
matches your local voltage. Make sure that
the AC power cord is fully inserted into the
unit.
Caution: (for North America)
To prevent electrical shock, match wide blade
of plug to wide slot, fully insert.
Note : When not being used on mains the
AC Cord should be unplugged from the unit.
NAMES OF CONTROLS RADIO OPERATION
You can listen to your favourite radio stations by sliding the FUNCTION
switch to RADIO, and then
1. Slide the BAND switch to choose AM(MW) or FM.
2. Using the TUNING control to choose a desired station.
• Adjust the VOLUME.
POWERING UP
BATTERY POWER
Insert "C" size batteries in the battery compartment. Be sure that the batteries
are inserted correctly to avoid damage to the unit.
Always remove the batteries when unit will not be used for a long period
of time, as this will cause leakage of the batteries and subsequently
damage to your unit.
Playback will automatically come to a
stop when the batteries have no more
power. Replace all the batteries with
new ones.
Do not mix old and new batteries. Do
not mix ALKALINE, standard
(CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
AM(MW)/FM
Repositioning the unit to get better AM(MW)/
FM reception.
Note: After listening, slide the FUNCTION switch
to TAPE.
VOLUME
Adjust the VOLUME control of the stereo system to a desired level.
FOR PRIVATE LISTENING
Connect headphones (Ø3.5 mm stereo mini-plug) to the PHONES jack.
When headphones are connected, speakers automatically disconnected.
ADJUSTING THE SOUND
TO STOP PLAYBACK
Press the CD STOP button to stop disc play.
TO INTERRUPT PLAYBACK
Press the CD PLAY/PAUSE button while a CD is playing to pause
play (the CD PAUSE " " indicator will blink).
Press the CD PLAY/PAUSE button again to resume play.
TO SKIP TO THE BEGINNING OF A TRACK
Press either one of the CD SKIP or button according to the desired
direction. Each press skips one track. During play, the first press on the
skip backwards button to the beginning of the current track.
Playback resumes from the selected track.
TO SEARCH THROUGH TRACKS
Keep either one of the CD SKIP or button pressed, according to the
desired direction, and release at the desired point.
REPEAT PLAY -- in play modes
This function allows one track or all tracks on a disc to be played repeatedly.
TO REPEAT THE SAME TRACK
Press the CD REPEAT button once during playback, the REPEAT ONE
" " indicator will blink.
TO REPEAT THE WHOLE DISC
Press the CD REPEAT button a second time to repeat all tracks, the
REPEAT ALL " " indicator will light.
TO CANCEL REPEAT PLAY
Press the CD REPEAT button until the REPEAT indicator is turned off.
Note: Repeat play can only be done when the unit is in the play mode.
TAPE PLAYBACK
1. Slide the FUNCTION switch to TAPE.
2. Insert a cassette tape.
3. Press the cassette of PLAY button.
TO STOP PLAYBACK
Press the cassette of STOP button.
TO FAST WIND
Press the cassette of F.FWD or REWIND button.
Press the cassette of STOP button to stop winding at the desired position.
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1. Insert a cassette tape.
2. Prepare the source to be recorded and play it.
3. Press the cassette of RECORD button which also engages the cassette
of PLAY button. Recording starts immediately.
TO STOP RECORDING
Press the cassette of STOP button.
WHEN THE END OF THE TAPE IS REACHED
The tape stop and the buttons are released automatically. To record on the
other side, turn the cassette over and press the cassette of RECORD button
again.
TO ERASE A RECORDED TAPE
1. Slide the FUNCTION switch to TAPE.
2. Insert a tape with the side you want to erase facing you.
3. Press the cassette of RECORD button to start erasing.
RECORDING FROM THE RADIO
( Refer to radio operation )
RECORDING FROM A CD
( Refer to CD play )
1. Slide the FUNCTION switch to CD. " " is shown in the display.
2. Open the CD door. Place a disc in the centre with the label side up and
then close the CD door gently. The total number of tracks will show in
the display.
3. Press the CD PLAY/PAUSE button to start CD play. The CD PLAY
" " indicator will light.
Adjust the VOLUME.
USING THE CD PLAYER
USING THE CASSETTE COMPARTMENT
7. CD display
8. CD SKIP button
9. CD SKIP button
10. Cassette compartment
11. Tuning control
12. BAND switch
13. PHONES jack
14. VOLUME control
15. FUNCTION switch
16. AC socket
To AC inlet
To wall AC outlet
Play " " indicator
Pause " " indicator
Repeat all " " indicator
Repeat one " " indicator
Track number
1
2
3
4
5
13
14
15
16
6
7
8
9
10
11
12
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durabrand CDA1366 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durabrand CDA1366 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info