35289
1
Zoom out
Zoom in
Previous page
1/2
Next page
- 9 -
- 10 -
- 11 -
- 12 -
- 13 -
COMPACT DISC PLAYBACK (continued)
- 14 -
REMOTE CONTROL
TAPE PLAYBACK RECORDING
TO STOP PLAYBACK
Press the STOP/EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume playing, press the PAUSE button again.
TO REWIND AND FASTWIND
Press the REWIND or F.FWD button. Press the STOP/EJECT
button to stop winding at the desired position.
WHEN THE TAPE REACHES ITS END
During fastwind or regular play, the tape will automatically stopped when its
end is reached.
TROUBLE SHOOTING GUIDE
To locate a particular point in a track
· To move forward at high speed, keep forward search button pressed and
release it at the desired point.
· To move backward at high speed, keep reverse search button pressed
and release it at the desired point.
· If the current track is searched over, it will continue to search the next track
until the end of the disc is reached. The searching will automatically be stopped.
If this happens during playback, the first track of the next numbered disc will
be played.
Note:
Searching and skipping can be done during playback or pause stage
but are effective for the currently selected disc only.
Use DISC SKIP button to choose another disc.
REVERSE FORWARD
Keep it pressed
REPEAT PLAYBACK
DURING PLAYBACK MODE
To repeat the current track
· Press the REPEAT button until ONE
SONG indicator lights up and the
currently playing track will be played
repeatedly until the STOP button is
pressed.
To repeat the whole disc
· Press the REPEAT button until ONE
DISC indicator lights up and the
current disc will be played repeatedly
starting from the currently playing
point.
To repeat all discs
· Press the REPEAT button until ALL
DISC indicator lights up.
To cancel repeat play
· Press the REPEAT button until all
indicators turn off.
1. SKIP/SEARCH button
2. REPEAT button
3. SKIP/SEARCH button
4. DISC SKIP button
5. PLAY/PAUSE button
6. STOP button
USING THE REMOTE CONTROL
CORRECTLY
· Point the Remote Control at the REMOTE
SENSOR located on the unit.
· When there is a strong ambient light source,
the performance of the infrared REMOTE
SENSOR may be degraded, causing
unreliable operation.
· The recommended effective distance for
remote operation is about 4 meters (13 feet).
TO INSTALL BATTERY
1. Take out the PVC sheet before
operating the remote control.
2. Open the battery door.
3. Insert one CR2025 (3V) size
battery.
BATTERY REPLACEMENT
When battery becomes weak, the operating distance of the Remote Control is
greatly reduced and you will need to replace the battery.
NOTE:
If the Remote Control is not to be used for a long time, remove the battery to
avoid damage caused by battery leakage corrosion.
1. Slide the FUNCTION selector to
TAPE.
2. Press the STOP/EJECT button.
3. Insert a cassette tape into the
cassette compartment with the
exposed side of cassette tape
downwards.
4. Press the PLAY button to begin
playback.
2. Press the PAUSE
button.
4. Prepare the source to be recorded
and play it.
3. Press the RECORD
button which also
engages the PLAY
button.
USE ONLY NORMAL (TYPE 1) TAPE FOR RECORDING
RECORDING FROM A CD
RECORDING FROM THE RADIO
(Refer to RADIO OPERATION)
TO STOP RECORDING
Press the STOP/EJECT button.
TO INTERRUPT RECORDING
Press the PAUSE button.
To resume recording, press the PAUSE
button again.
TO ERASE A RECORDED TAPE
1)
Slide the FUNCTION selector to
TAPE.
2)
Insert a tape with the side you
want to erase facing you.
3)
Press the RECORD button to
start erasing.
PROBLEMS
GENERAL
No sound
No sound from one channel or
unbalance left an right volume
Reversed left and right sound
Lack of bass sound or apparently
imprecise physical location of
musical instruments
Severe hum or noise
CD
System does not turn on
Disc in place but unit won’t play
Disc skips
RADIO
Poor FM reception
Poor AM/MW reception
TAPE
Distorted or noisy recording
Record button won’t depress
ITEMS TO CHECK
· Turn VOLUME clockwise.
· The headphones are connected.
Disconnect them.
· Check the speaker connections of the
inoperative channel.
· Check the speaker cord connection and
speaker location.
· Check the speaker connection for proper
phasing.
· The TV or VCR is too close to the stereo
system. Separate the stereo system from
the TV or VCR.
· Make sure AC power plug is secure in the
outlet, and outlet has power.
· Make sure FUNCTION selector is set to
CD.
· Make sure disc label is facing up.
· Make sure disc is clean.
· Pause mode is activated.
· Disc may be damaged or dirty; check disc.
· Make sure the unit is on a secure spot.
Vibration or jarring can cause the disc to
skip.
· Make sure FM antenna wire is unwound.
· Electrical interference in your home can
cause poor reception. Move the unit away
from sources of interference (especially
those with motors and transformers).
· Reposition or turn the main unit for better
reception.
· Tape heads are dirty; clean them.
· Tape is damaged. Try another tape.
· Tabs on edge of cassette may be missing
or broken. If you want to record on that
cassette cover the holes with removable
tape.
CLEANING CD
If the CD skips or will not play, the disc may need to
be cleaned.
Before playing, wipe the disc from the centre out
with a cleaning cloth. After playing, store the disc in
its case.
CLEANING THE TAPE HEADS
To maintain optimum sound quality, clean the
playback/recorded heads(a), erasure head(b), pinch
roller(c), and capstans(d) regularly (every 10 hours
of use ). Use a cotton swab lightly moistened with cleaning fluid or denatured
alcohol.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft
cloth.
IMPORTANT NOTE
· If an abnormal display indication or an operating problem occurs, disconnect
the AC power cord. Wait at least 5 seconds, then reconnect it .
· Before transporting the unit, take out all discs from the CD tray.
MAINTENANCE
SPECIFICATIONS
Power consumption: 10W
Power source: AC 120V-60Hz
Specifications are subject to change without notice.
811-215591-010 Printed in China
5. Press the PAUSE
button.
1. Insert a cassette tape into the
cassette compartment.
(Refer to COMPACT DISC PLAYBACK)
Cd2155
5 CD HOME STEREO SYSTEM
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durabrand CD2155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durabrand CD2155 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info