651097
8
Zoom out
Zoom in
Previous page
1/11
Next page
INSTRUCTION MANUAL
8
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR REFRIGERATOR
Remove the exterior and interior packing
Check to be sure the following parts are included:
o slide out shelves (DAT-6.16C 2pcs, DAT-12.33DC 4 pcs, DAT-12.33C
&DAT-24.68DC 5 pcs, DX-28.65C 6 pcs)
o instruction manual
Before connecting the appliance to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a floor that is strong enough to support the appliance
when it is fully loaded. To level your appliance, adjust the front legs at the bottom
of the appliance.
Do not place the unit to direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Extreme cold or hot ambient temperatures
may also cause the appliances not to perform properly. Never place the cooler
on the top of refrigerator!. Never build or recess the cooler into the
furniture. For such installation choose our built-in or under counter
models!
ELECTRICAL CONNECTION
Warning!
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK.
IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED PRODUCTS
SERVICE CENTER.
This unit should be properly grounded for your safety. The power cord of this unit
is equipped with a 2-pin plug which mates with 2-pin wall outlets to minimize the
possibility of electrical shock. Do not under any circumstances cut or remove the
ground from the power cord supplied.
Use of extension cords is not recommended.
This unit requires a standard 220V-50HZ electrical outlet with 2-pin plug.
The cord should be secured behind the refrigerator and not let exposed or
dangling to prevent accidental injury.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dunavox DAT-12.33C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dunavox DAT-12.33C in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info