KilrockK DescalerInstruction Manual For Dualit Metal and Plastic Kettles
IMPORTANT NOTICE: PRODUCT FAILURE DUE TO THE BUILD UP OF LIMESCALE IS NOT COVERED BY GUARANTEE. Dualit recommends descaling at least once a month, in a well-ventilated area, to prevent limescale build up in the
kettle. The descale cycle can take between 15 minutes –1 hour depending on the limescale build up in your kettle. For more information or to buy the Dualit recommended descaler, KilrockK, visit our website www.dualit.com/spares
or contact Customer Services on 01293 652500 extension 1. WEAR RUBBER GLOVES. DO NOT USE ON MARBLE OR ENAMEL SURFACES. DO NOTPUT BOTTLE DOWN ON WORK SURFACES. WIPE BOTTLE AFTER USE.
Half fill the kettle with water, and
boil. Once boiled, unplug andleave
to stand for one minute. Caution:
Do not boil kettle with descaling
solution in it. Risk of scalding and
chemical inhalation.
Remove the kettle from the Power
Base, then place on a draining
board or suitable waterproof
drained surface. Risk of damage
and scalding.
With the spout facing away from
people, sockets, non-waterproof
walls and surfaces, add 1 measure
of Kilrock
K (following the guideline
on the bottle). Once added, if the
limescale on your kettle is above
the waterline, you can add more
fresh water from the hot water
tap. Caution: Be aware of
splashing. Risk of scalding and
chemical inhalation.
Leave the KilrockK in the kettle for
a minimum of 5 minutes, or until
all the limescale has gone. Leave
for no longer than 1 hour.
NEVER BOIL WITH DESCALE
SOLUTION INSIDE.
Wearing gloves, open the lid and
remove the Water Filter.Warning:
Steam will escape as the lid opens.
Lid will be hot, touch only the
plastic ring/knob/latch/touch pad.
Risk of scalding.
Place the Water Filter into a large
mug.
Pour just enough of the kettle
contents to cover the Water Filter.
Leave to soak whilst carrying out
step 7.
Pour away remaining contents and
rinse the kettle out a minimum of 3
times by filling with fresh water to
MAX then emptying completely.
Caution: Failure to do so can cause
scalding and injury. Risk of
chemical ingestion.
Pour away contents from the mug
and hand wash the Water Filter.
Ensure to also clean your mug.
Insert the Water Filter back into
the Filter Holder. Refill the kettle
with water to MAX, plug in, bring
to the boil then discard boiled
water.Descale is now complete.
For severely scaled kettles you may
wish to repeat this process.
Unplug, then once cooled down
wash off any spillage. Wash hands
thoroughly after handling.Refer to
the Cleaning & Care instructions in
your kettle manual.
GB-A
Contains:Formic Acid and Additives. KILROCK PRODUCTS LTD. Unit 1b Alma Road Industrial Estate, Chesham, Bucks, HP5 3HB
12345
678910
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dualit Architect Kettle at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dualit Architect Kettle in the language / languages: English as an attachment in your email.
The manual is 0.21 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
